Industrial Pumps Dubai | Industrial Pump Supplier UAE.                                                                                                                            Email: [email protected]

Helix V
Design
Non-self-priming, high-efficiency multistage high-pressure centrifugal pump in vertical design with in-line connections

Equipment/function
  • Corrosion-resistant impellers, guide vanes and stage housings​

Description/design
  • Pumps can be adapted to specific circumstances on request (e.g. motor protection, ATEX, extended ambient temperature range).
  • The Helix series is also available with an integrated frequency converter.
Need a Quote
Working on a project and need quoting? Contact us today for a free quote
Email: [email protected]
Materials:

Helix V 2, 4, 6, 10, 16:
Standard version
  • Impellers, stage housings and guide vanes made of stainless steel 1.4307 (AISI 304L)
  • ​Pump housing made of stainless steel 1.4301 (AISI 304) Baseplate and lantern in EN-GJL-250 (cataphoretic coated)
  • Shaft made of stainless steel 1.4301 (AISI 304) or 1.4462 (AISI 318LN) (depending on version)
  • Sleeve under the mechanical seal 1.4404 (AISI 316L)
  • O-ring of EPDM (FKM gasket on request)
  • Jacket pipe made of stainless steel 1.4301 (AISI 304)

For aggressive media
  • Impellers, stage housings and guide vane apparatuses of stainless steel 1.4404 (AISI 316L)
  • Pump housing made of stainless steel 1.4404 (AISI 316L)
  • Shaft made of stainless steel 1.4404 (AISI 316L) or 1.4462 (AISI 318LN) (depending on version)
  • Sleeve under the mechanical seal 1.4404 (AISI 316L) O-ring of FKM (EPDM gasket on request)
  • Jacket pipe made of stainless steel 1.4404 (AISI 316L)

Helix V 22, 36, 52:
Standard version
  • Stage housings, impellers, guide vane apparatuses made of stainless steel 1.4307 (AISI 304L)
  • Pump housing made of stainless steel 1.4308 (AISI 304) or cataphoretic-coated grey cast iron EN-GJL 250, loose flanges made of cataphoretic-coated grey cast iron EN-GJL 250 for Helix V 22 / EN- GJS 400 for Helix V 36-52.
  • Shaft made of stainless steel 1.4057 (AISI 431) Sleeve under the mechanical seal 1.4404 (AISI 316L) O-ring of EPDM (FKM gasket on request)
  • Jacket pipe made of stainless steel 1.4301 (AISI 304)​

For aggressive media
  • Stage housings, impellers, and guide vane apparatuses made of stainless steel 1.4404 (AISI 316L)
  • Pump housing: all parts which come in contact with the media are made of cast stainless steel 1.4409 (AISI 316L); loose flanges of cataphoretic-coated grey cast iron EN-GJL 250 for Helix V 22 / EN- GJS 400 for Helix V 36-52.
  • ​Baseplate made of stainless steel 1.4301 (AISI 304)
  • Shaft made of stainless steel 1.4404 (AISI 316L) or 1.4462 (AISI 318LN) (depending on version)
  • Sleeve under the mechanical seal 1.4404 (AISI 316L)
  • O-ring of FKM (EPDM gasket on request)
  • Pressure shroud made of stainless steel 1.4404 (AISI 316L)