- Published on
If you're getting lukewarm or cold water from your taps, use the list below to troubleshoot why your solar water heater is not heating.
Not enough sunlight
On cloudy days, less sunlight may mean less reliable heating from your solar hot water system. You may have to rely on your booster heating unit more often during these periods.
Booster not working
If you are using your booster system correctly and still only running lukewarm or cold water, it could be a problem with the booster.
The solar collectors will be less effective if they are in the shade of a tree or if they are dirty.
Check that the thermostat is set at an appropriate temperature. Usually this is between 60 and 70 degrees celsius. If the thermostat setting is incorrect, you may need a qualified professional to adjust the settings for you.
System is too small for your household
If you are running out of hot water it could be because you are using more hot water than you expected or because the storage tank is too small for your household needs.
Temperature pressure relief valve problems
The temperature pressure relief valve helps your hot water system release excess temperature and pressure in a safe way.
It's normal for the valve to let out a small amount of water during the water heating cycle. However, if you notice large amounts of water coming out of the valve it could indicate a blockage or pressure issue.
If you notice water leaking on the roof or near the hot water tank on the ground, the most likely cause is the temperature pressure relief valve (see above).
Small amounts of water is normal as the system tries to cope with excess heat and pressure. However, large leaks should be attended to as soon as possible as they can be a sign of a larger problem.
Leaks may also be caused by damaged pipe fittings, burst pipes or loose nuts. Call a professional to inspect the problem and replace parts where necessary.
For more info contact solar water heater supplier in uae or call us at +971 4 252 2966
Not enough sunlight
On cloudy days, less sunlight may mean less reliable heating from your solar hot water system. You may have to rely on your booster heating unit more often during these periods.
Booster not working
If you are using your booster system correctly and still only running lukewarm or cold water, it could be a problem with the booster.
- First, check that the booster element is switched on. Look for "Hot Water" or "Water Heater" on your power switchboard.
- Then check if there is a timer on the booster which is cutting it off when you need hot water.
- If you suspect the unit is receiving no power, it's best to call a professional in to inspect the situation.
The solar collectors will be less effective if they are in the shade of a tree or if they are dirty.
- Clean the glass and trim back any foliage surrounding the solar panels to maximise sunlight.
- If the shading is permanent (for example if it's caused by a building) you may need to relocate your solar collectors. Talk to iBreeze for a no-obligation solar hot water installation quote.
Check that the thermostat is set at an appropriate temperature. Usually this is between 60 and 70 degrees celsius. If the thermostat setting is incorrect, you may need a qualified professional to adjust the settings for you.
System is too small for your household
If you are running out of hot water it could be because you are using more hot water than you expected or because the storage tank is too small for your household needs.
- Assess your household use of hot water. For example, consider having shorter hot showers and using the cold cycle on your washing machine.
- Ask a plumber to install a flow control valve to reduce water usage and adjust your hot water usage patterns to maximise periods of sunlight.
- If there's still a problem, consider upgrading to a larger water heating system. Chat with a water heater expert from iBreeze for advice about what size system is right for you.
Temperature pressure relief valve problems
The temperature pressure relief valve helps your hot water system release excess temperature and pressure in a safe way.
It's normal for the valve to let out a small amount of water during the water heating cycle. However, if you notice large amounts of water coming out of the valve it could indicate a blockage or pressure issue.
- Carefully lift the lever of the temperature pressure relief valve if it is accessible. This may dislodge a small blockage and solve the problem. If the lever is not accessible, you will need to have it looked at by a professional.
- A steady flow of water at night may indicate the mains pressure sometimes exceeds the pressure of the water heater. Installing a pressure limiting valve may solve the problem.
- If there is a heavy flow of hot water when the booster is switched on, it could be an indication that there is no over temperature protection system. You should switch the water heater off at the switchboard and arrange for repairs as soon as possible.
If you notice water leaking on the roof or near the hot water tank on the ground, the most likely cause is the temperature pressure relief valve (see above).
Small amounts of water is normal as the system tries to cope with excess heat and pressure. However, large leaks should be attended to as soon as possible as they can be a sign of a larger problem.
Leaks may also be caused by damaged pipe fittings, burst pipes or loose nuts. Call a professional to inspect the problem and replace parts where necessary.
For more info contact solar water heater supplier in uae or call us at +971 4 252 2966
0 Comments
