- Published on
1. AIR LEAK IN SUCTION LINE
As fluid recirculates in the pump and forces air out of the discharge chamber, it’s trying to create an area of low pressure. However, if there’s a leak in the suction line, air continues to be drawn into the pump, never allowing it to release enough to create that area of low pressure
2. DEBRIS IN THE IMPELLER
If the eye of then impeller is plugged with debris, it removes the hydraulic capability of the impeller to create an area of low pressure.
3. PUMP IS AIR BOUND
A pump can become air bound if it experiences any of these conditions:
- NO AIR RELEASE LINE
- If there is no air release line, air cannot be vented to the atmosphere, and instead collects on the discharge side.
- DISCHARGE LINE IS PRESSURIZED
- Valve on the air release line is closed, and the valve on the discharge line is closed, again, giving no place for the air to go and get out of the pump.
- EXCESSIVE IMPELLER CLEARANCE
- If there is excessive clearance between the impeller and the wear plate, the pump has a difficult time creating a low pressure area. This is typically caused by wear, but could also be due to improper reassembly.
4. PLUGGED RECIRCULATION PORT
During the priming process, as discussed above, fluid is recirculated through the volute casing. If the recirculation port becomes plugged, the eye of the impeller is unable to create an area of low pressure in which to pull liquid up the suction line.
5. LIFT TOO HIGH FOR PUMP SPEED OR IMPELLER DIAMETER
If you’ve undersized the pump for the suction line, it will not be able to create the low pressure area it needs to prime. It’s important to understand the suction lift requirements before selecting a pump for the application.
Having a pump that won’t prime, loses its prime, or is slow to prime? Ask us about it at water pump dubai We gladly provide technical assistance to businesses
Having a pump that won’t prime, loses its prime, or is slow to prime? Ask us about it at water pump dubai We gladly provide technical assistance to businesses
0 Comments
