- Published on
When dealing with pumps in your industrial pump operation, it’s important to make sure all the gears are in place. At water pump dubai, we’re all about helping pump users get the most out of their equipment and maximize efficiency in every application. In this article, we want to highlight some of the most common mistakes made in industrial pump operations.
For more info contact water pump dubai or call us at +971 4 252 2966
- Operating the Pump in Reverse
All pumps are designed to run with either a clockwise or counter-clockwise rotation, depending on the type of pump. A common mistake is made when the pump is operated in the reverse rotation of its design. This is especially problematic for ANSI pumps with threaded shafts and impellers that have no way to prevent the impeller from backing off.
- Ignoring the Operating Manual
This is perhaps the biggest mistake we see, and it is easy corrected. Pump owners and all operators should take the time to review the instruction and operating manual (IOM) before using the pump. It should regularly be referred to during operation so that it is run correctly and maintained as needed. Every pump is a little different and it takes time to understand how to operate it for optimal results and increased lifespan.
- Forgetting to Put Oil in the Bearing Housings
It’s very important to know that a majority of pump manufacturers do not put oil in the pump bearing housings before they are shipped. There are many restrictions against shipping with the oil (a hazardous material) inside the housings; therefore, operators need to make sure that they put the oil in the bearing housings before operating the pump. Otherwise, damage will occur without proper lubrication.
- Running a Second Pump without System Adjustments
Too many operators may decide to install a secondary pump and run it parallel next to an existing pump, thinking it will increase the output. This works some of the time; However, it often causes more problems than it solves. Make sure the system is designed to handle and control two (or more) pumps before using multiple parallel pumps.
- Confusing Suction Pressure with NPSHA
Net Positive Suction Head Availability (NPSHA) and suction pressure are not the same thing. It is very important to understand how the impeller and fluid intake process works in any given pump, so that is properly installed, operated, controlled, monitored and maintained. This will help you generate the desired flow rate, operate the pump efficiently and maximize the life of the equipment.
For more info contact water pump dubai or call us at +971 4 252 2966
- Published on
Submersible pumps are specifically designed to deal with harsh situations like mines, sewers and other inhospitable places. Every challenging environment brings with it a unique set of needs. Every operation will be a little different.
This is why it’s so important to make sure you have the right submersible pump for the job. Sometimes the pump’s daily operating conditions will expose it to constant stresses. Other times, the materials being pumped are abrasive, corrosive or highly hazardous and the pump will need to be made of specialized materials. Or, it will need to have specific features to handle whatever is being pumped through it.
Let’s look at some examples of harsh environments:
Fluids That Contain Abrasive Solids
Coal-powered plants, drilling operations and quarries typically generate fluid slurries that are full of highly abrasive materials. Regular pumps will not hold up in such conditions, because the fluids essentially act like sandpaper on the impeller and other pump components.
To combat this, you will want a submersible pump that is constructed of materials that are harder than cast iron. Specialized materials will be able to withstand the abrasion and impact damage without sacrificing flow rates. Rubber-lined pumps may also be an effective way to minimize corrosion, although they can be more costly to maintain and may limit the discharge head more than pumps built of more robust materials.
Landfills
Landfills are difficult environments that can be harsh and hazardous. Landfill pumps may handle highly corrosive and toxic chemicals and explosive natural gases. A submersible pump for a landfill must be designed correctly and be constructed of the proper materials to withstand such tough conditions.
Pumps built from stainless steel materials can minimize corrosion in coniditions found at landfills. Sealing systems is extremely important to prevent leaks when dealing with hazardous or toxic chemicals that can do damage to the internal working of the pump and the environment.
High Temperatures
Whenever you are dealing with fluid temperatures above 104 °F, your submersible pump is at risk of failure. Elastomers can melt and the hot water can penetrate the pump motor. You’ll want a submersible pump designed to handle high temperatures. We recommend the Fahrenheit Series from BJM Pumps, which are rated for temperatures up to 200 °F.
Explosive Materials
Any application involving decomposed waste matter, which produces methane, or other volatile gases, requires an explosion-proof submersible pump. Such applications include gas production, manure washdown, sewage treatment, distilleries and leachate. If the equipment produces any kind of spark, it can lead to a catastrophic explosion.
For more info contact water pump dubai or call us at +971 4 252 2966
This is why it’s so important to make sure you have the right submersible pump for the job. Sometimes the pump’s daily operating conditions will expose it to constant stresses. Other times, the materials being pumped are abrasive, corrosive or highly hazardous and the pump will need to be made of specialized materials. Or, it will need to have specific features to handle whatever is being pumped through it.
Let’s look at some examples of harsh environments:
Fluids That Contain Abrasive Solids
Coal-powered plants, drilling operations and quarries typically generate fluid slurries that are full of highly abrasive materials. Regular pumps will not hold up in such conditions, because the fluids essentially act like sandpaper on the impeller and other pump components.
To combat this, you will want a submersible pump that is constructed of materials that are harder than cast iron. Specialized materials will be able to withstand the abrasion and impact damage without sacrificing flow rates. Rubber-lined pumps may also be an effective way to minimize corrosion, although they can be more costly to maintain and may limit the discharge head more than pumps built of more robust materials.
Landfills
Landfills are difficult environments that can be harsh and hazardous. Landfill pumps may handle highly corrosive and toxic chemicals and explosive natural gases. A submersible pump for a landfill must be designed correctly and be constructed of the proper materials to withstand such tough conditions.
Pumps built from stainless steel materials can minimize corrosion in coniditions found at landfills. Sealing systems is extremely important to prevent leaks when dealing with hazardous or toxic chemicals that can do damage to the internal working of the pump and the environment.
High Temperatures
Whenever you are dealing with fluid temperatures above 104 °F, your submersible pump is at risk of failure. Elastomers can melt and the hot water can penetrate the pump motor. You’ll want a submersible pump designed to handle high temperatures. We recommend the Fahrenheit Series from BJM Pumps, which are rated for temperatures up to 200 °F.
Explosive Materials
Any application involving decomposed waste matter, which produces methane, or other volatile gases, requires an explosion-proof submersible pump. Such applications include gas production, manure washdown, sewage treatment, distilleries and leachate. If the equipment produces any kind of spark, it can lead to a catastrophic explosion.
For more info contact water pump dubai or call us at +971 4 252 2966
- Published on
Everyone loves a powerful and invigorating shower to kick-start their day. But if your home suffers from low water pressure, you could be left with a disappointingly slow flow. An efficient water boosting pump can turn a small dribble into a powerful shower.
If you have recently fitted a great new shower but are not feeling the benefits as you have low water pressure, a shower pump can easily solve the problem. If your home had great pressure before fitting your new shower, it could be because the pipes have become damaged. Unfortunately, this is common with poor workmanship. If the work caused any bends or blockages in the pipes leading into the bathroom, the pressure can be reduced.
There are many homes across the UK which suffer from low water pressure. If you live in a small housing estate you are probably all served by the same water supply system. You could be the unlucky person to be situated at the end of the pipes, resulting in a poor pressure within your home. If you live on a hill, at the top of a block of flats or in a very tall home you could also be affected by low water pressure.
There are pumps designed to increase the flow speed of water through the entirety of your home's plumbing system. It doesn't just provide a benefit to the shower, the whole house can easily feel the improvement.
Here at water pump dubai, we stock a range of water boosting pumps to improve the pressure of the water across your whole home.
Our boost tanks are a quick solution, they can be fitted without the need for a cold water break tank and meet all water regulations.
For more information contact us or call us at +971 4 252 2966
If you have recently fitted a great new shower but are not feeling the benefits as you have low water pressure, a shower pump can easily solve the problem. If your home had great pressure before fitting your new shower, it could be because the pipes have become damaged. Unfortunately, this is common with poor workmanship. If the work caused any bends or blockages in the pipes leading into the bathroom, the pressure can be reduced.
There are many homes across the UK which suffer from low water pressure. If you live in a small housing estate you are probably all served by the same water supply system. You could be the unlucky person to be situated at the end of the pipes, resulting in a poor pressure within your home. If you live on a hill, at the top of a block of flats or in a very tall home you could also be affected by low water pressure.
There are pumps designed to increase the flow speed of water through the entirety of your home's plumbing system. It doesn't just provide a benefit to the shower, the whole house can easily feel the improvement.
Here at water pump dubai, we stock a range of water boosting pumps to improve the pressure of the water across your whole home.
Our boost tanks are a quick solution, they can be fitted without the need for a cold water break tank and meet all water regulations.
For more information contact us or call us at +971 4 252 2966
- Published on
Whether it’s a leaking valve, pump housing, connector or pipe, there are many concerns that will arise. First, it’s bad for equipment, which is not going to run efficiently. This leads to lost productivity and increased downtime to make repairs. Second, it’s bad for the environment, especially when equipment is leaking hazardous pollutants into the ground, water or air.
Unfortunately, leaks can happen. That’s why it pays to be prepared with quality practices, good maintenance plans and thorough staff training. This can minimize the risk of leaks happening in the first place, but also puts leak detection, repair and recovery steps in motion in case one does happen.
Here are some practices to help you manage leaks more effectively, according to the pump system engineering experts.
Understand and Conform to Regulations
Leaks are serious business and can shut down your whole operation if you don’t comply with EPA, OSHA and other regulations that apply to your business. Compliance is not just about avoiding regulatory fines, though that’s important. Regulations also establish a baseline of good practices that can help an operation avoid problems like leaks and address them safely and efficiently if they do occur.
Training
High quality training programs for employees who work the plant floor can help them detect, assess and correct leaks in a manner that is thorough and safe. By training crews in preventative maintenance techniques, a business can substantially reduce the number of leak incidents it experiences.
Regular System Inspections and Monitoring
In addition to routine maintenance of equipment, thorough system inspections can proactively avoid leaks and other breakdowns. If a part like a valve or connector looks damaged or worn out, replace it before it becomes a problem.
Component Identification and Inventory
Every regulated component in the pump system should have a unique identification number. Keep a complete and accurate equipment log and parts inventory so you are always prepared if something fails and needs to be repaired or replaced. The more organized you are, the quicker your staff will be able to react to potential leaks.
Defining the Leaks
Once a leak is detected, it needs to be properly identified and defined. Federal and state regulations may have different compliance thresholds with respect to leaks of the materials in your system. Understanding what those thresholds are and when they may be crossed is an important part of compliance.
Have Maintenance and Repair Plans in Place
Always make sure to have maintenance plans and repair procedures in place so your staff is ready to handle any problems that arise. At the first sign of a major leak, your team needs to be prepared and the repair steps should be crystal clear to minimize downtime and avoid pump catastrophes.
These are just some practices and procedures that you should enact when running a pump operation. For more info contact water pump dubai or call us at +971 4 252 2966
Unfortunately, leaks can happen. That’s why it pays to be prepared with quality practices, good maintenance plans and thorough staff training. This can minimize the risk of leaks happening in the first place, but also puts leak detection, repair and recovery steps in motion in case one does happen.
Here are some practices to help you manage leaks more effectively, according to the pump system engineering experts.
Understand and Conform to Regulations
Leaks are serious business and can shut down your whole operation if you don’t comply with EPA, OSHA and other regulations that apply to your business. Compliance is not just about avoiding regulatory fines, though that’s important. Regulations also establish a baseline of good practices that can help an operation avoid problems like leaks and address them safely and efficiently if they do occur.
Training
High quality training programs for employees who work the plant floor can help them detect, assess and correct leaks in a manner that is thorough and safe. By training crews in preventative maintenance techniques, a business can substantially reduce the number of leak incidents it experiences.
Regular System Inspections and Monitoring
In addition to routine maintenance of equipment, thorough system inspections can proactively avoid leaks and other breakdowns. If a part like a valve or connector looks damaged or worn out, replace it before it becomes a problem.
Component Identification and Inventory
Every regulated component in the pump system should have a unique identification number. Keep a complete and accurate equipment log and parts inventory so you are always prepared if something fails and needs to be repaired or replaced. The more organized you are, the quicker your staff will be able to react to potential leaks.
Defining the Leaks
Once a leak is detected, it needs to be properly identified and defined. Federal and state regulations may have different compliance thresholds with respect to leaks of the materials in your system. Understanding what those thresholds are and when they may be crossed is an important part of compliance.
Have Maintenance and Repair Plans in Place
Always make sure to have maintenance plans and repair procedures in place so your staff is ready to handle any problems that arise. At the first sign of a major leak, your team needs to be prepared and the repair steps should be crystal clear to minimize downtime and avoid pump catastrophes.
These are just some practices and procedures that you should enact when running a pump operation. For more info contact water pump dubai or call us at +971 4 252 2966
- Published on
A sludge pump must be very resistant to abrasion. Wear at the wetted parts can occur from the solid content in the fluid. Sludge and slurry are often pumped below the pump unit itself. Good priming capabilities are therefore very important for a sludge pump.
Example applications of pumping slurry-like fluids are anaerobic-treated sludge and raw sludge. Each slurry type varies in its solid content and viscosity has their own physical appearance. Anaerobic sludge has a lower temperature then raw sludge. The Verderair double diaphragm pump can handle the majority of sludge types.
Another good application example of a slurry pump is a ceramic clay pump.
Yeast is an essential ingredient for brewing beer. Once the yeast, hops and other liquids in the tanks is fermented, the yeast recovered from the fermentation is pumped back into the process with sanitary diaphragm pumps. The waste yeast slurry is brought outside the production process with industrial air operated diaphragm pumps. A common use of waste yeast slurry is found in the production of animal feed. The slurry contains highly abrasive material which can be handled by a Verderair double diaphragm pump with ease.
A common occurrence when pumping is the priming of air. An air operated diaphragm pump can handle air within the fluid. A slurry pump also prevents air from the environment being added to the slurry.
For more info contact water pump dubai or call us at +971 4 252 2966
Example applications of pumping slurry-like fluids are anaerobic-treated sludge and raw sludge. Each slurry type varies in its solid content and viscosity has their own physical appearance. Anaerobic sludge has a lower temperature then raw sludge. The Verderair double diaphragm pump can handle the majority of sludge types.
Another good application example of a slurry pump is a ceramic clay pump.
Yeast is an essential ingredient for brewing beer. Once the yeast, hops and other liquids in the tanks is fermented, the yeast recovered from the fermentation is pumped back into the process with sanitary diaphragm pumps. The waste yeast slurry is brought outside the production process with industrial air operated diaphragm pumps. A common use of waste yeast slurry is found in the production of animal feed. The slurry contains highly abrasive material which can be handled by a Verderair double diaphragm pump with ease.
A common occurrence when pumping is the priming of air. An air operated diaphragm pump can handle air within the fluid. A slurry pump also prevents air from the environment being added to the slurry.
For more info contact water pump dubai or call us at +971 4 252 2966
- Published on
What is slurry?
First of all, what is slurry? Slurry is a semiliquid mixture, typically comprised of fine particles. Examples of slurries may include manure, cement, starch, or coal suspended in water. There are countless other combinations that could be considered “slurries”. Because of the added particles and thicker consistency, special pump requirements should be considered. A standard water pump might be able to handle the fluid, but not as effectively as a properly-sized slurry pump.
Let’s consider the impeller. Slurry pumps must have thicker vanes than water pumps to allow for wear and tear. Because of the added thickness, there will be fewer vanes, otherwise the passageways would be too narrow and would hinder the pump’s performance. The impeller should have large enough passageways so that the largest solid particles can pass through without clogging.
Another important part of a slurry pump is its casing, which handles all of the pressure. Slurry pump casings should have larger gaps between the impeller and the cutwater tongue to reduce wear and to prevent large solid particles from getting stuck. Because of the additional space, there is more recirculation inside a slurry pump casing under various operating conditions. Again, this accelerates wear compared to a typical water pump.
Materials of Construction
Metal and/or rubber pump liners are used to combat the erosion from the solid particles that are found in slurry. This pump is lined with rubber.
Metal slurry pump casings are usually made of hard alloys to resist erosion caused by the increased pressure and circulation. Sometimes wear-resistant steel is used on pump casings so that the pump can be welded if in need of repair.
Remember, slurry pumps are designed to suit specific pumping conditions. Pumps used in the cement industries handle mostly fine particles at low pressures, so the casings can be of light construction. In rock pumping, the pump casing and impeller must resist hard knocks, so they must be built thick and strong.
Slurry pumps also have a provision for simple axial adjustment of the gap between the impeller and the adjoining throatbush seal face. This assists in maintaining pump performance as the inner component parts start to wear.
For more info contact water pump dubai or call us at +971 4 252 2966
First of all, what is slurry? Slurry is a semiliquid mixture, typically comprised of fine particles. Examples of slurries may include manure, cement, starch, or coal suspended in water. There are countless other combinations that could be considered “slurries”. Because of the added particles and thicker consistency, special pump requirements should be considered. A standard water pump might be able to handle the fluid, but not as effectively as a properly-sized slurry pump.
Let’s consider the impeller. Slurry pumps must have thicker vanes than water pumps to allow for wear and tear. Because of the added thickness, there will be fewer vanes, otherwise the passageways would be too narrow and would hinder the pump’s performance. The impeller should have large enough passageways so that the largest solid particles can pass through without clogging.
Another important part of a slurry pump is its casing, which handles all of the pressure. Slurry pump casings should have larger gaps between the impeller and the cutwater tongue to reduce wear and to prevent large solid particles from getting stuck. Because of the additional space, there is more recirculation inside a slurry pump casing under various operating conditions. Again, this accelerates wear compared to a typical water pump.
Materials of Construction
Metal and/or rubber pump liners are used to combat the erosion from the solid particles that are found in slurry. This pump is lined with rubber.
Metal slurry pump casings are usually made of hard alloys to resist erosion caused by the increased pressure and circulation. Sometimes wear-resistant steel is used on pump casings so that the pump can be welded if in need of repair.
Remember, slurry pumps are designed to suit specific pumping conditions. Pumps used in the cement industries handle mostly fine particles at low pressures, so the casings can be of light construction. In rock pumping, the pump casing and impeller must resist hard knocks, so they must be built thick and strong.
Slurry pumps also have a provision for simple axial adjustment of the gap between the impeller and the adjoining throatbush seal face. This assists in maintaining pump performance as the inner component parts start to wear.
For more info contact water pump dubai or call us at +971 4 252 2966
- Published on
You’ve been delaying the inevitable for a while now, just hoping your water pump issues would go away on their own or that a simple repair job would keep it going. However, you think your water pump may finally be on its way out. Is it time for water pump replacement?
At Water Pump Company of Dubai, we share with our customers these four common signs that your home may need a new pump:
If these are the types of troubles you’ve been having with your water pump, it’s time to call our professional and reliable team at Water Pump Dubai. We can come to your home to assess the issues your water pump is having. Whether you have a submersible pump, constant pressure pump, or another type of system, we’ve got you covered. Our team is knowledgeable in repairing and replacing all types of water pumps. We’ll be able to tell you what the problem is and if you indeed need a pump replacement.
The other good news is that we specialize not only in water pump repairs and maintenance, but also in installations. We can help you choose just the right water pump for your home. We’ll make sure you get a quality pump that will be reliable for years to come and will install it with expertise.
To get started diagnosing whether it’s time to replace your water pump, contact our crew at Water Pump Dubai today at +971 4 252 2966. We provide water pump, well, water tank, and well inspection services to residents throughout UAE, Dubai, Sharjah. We hope we can add you to our long list of satisfied customers.
At Water Pump Company of Dubai, we share with our customers these four common signs that your home may need a new pump:
- Your water pressure is on the decline.
- Your utility bills have increased noticeably.
- You’ve noticed dirty or murky water coming from your faucets.
- You’ve heard loud, banging noises coming from your water pump.
If these are the types of troubles you’ve been having with your water pump, it’s time to call our professional and reliable team at Water Pump Dubai. We can come to your home to assess the issues your water pump is having. Whether you have a submersible pump, constant pressure pump, or another type of system, we’ve got you covered. Our team is knowledgeable in repairing and replacing all types of water pumps. We’ll be able to tell you what the problem is and if you indeed need a pump replacement.
The other good news is that we specialize not only in water pump repairs and maintenance, but also in installations. We can help you choose just the right water pump for your home. We’ll make sure you get a quality pump that will be reliable for years to come and will install it with expertise.
To get started diagnosing whether it’s time to replace your water pump, contact our crew at Water Pump Dubai today at +971 4 252 2966. We provide water pump, well, water tank, and well inspection services to residents throughout UAE, Dubai, Sharjah. We hope we can add you to our long list of satisfied customers.
- Published on
Low water pressure, excess water underneath your home, or a hot shower that suddenly turns cold, are all signs of a defective water system. When you begin to experience these type of issues in your home, it may be time to replace the water pump mechanism. At water pump dubai, we handle all types of water pump repairs and installations. Below are four different water pumps that are helpful for maintaining an efficient and dependable water system for your home.
1. Submersible Pumps
Submersible pumps are water pumps that sit well below the ground. They are designed to push fluid to the surface as opposed to pulling the fluid toward the house as jet pumps do. Our technicians use only top-notch pumps from manufacturers such as Gould, Sta-Rite, and Grundfos.
2. Sump Pumps
These type of pumps are specifically for basements and crawl spaces. They are perfect for homes that are located in low-lying areas and are susceptible to possible flooding. Sump pumps pull out excess water that builds up in your basement or underneath your home.
3. Jet Pumps
Jet pumps are used primarily in shallow wells, as they can only be installed as low as 25 feet below the ground. They draw water up from the well through the use of suction caused by atmospheric pressure. Jet pumps are mounted above the well either inside your home or in a separate well house.
4. Constant Pressure Pumps
Do you experience times of low water pressure in your home? Is it impossible to do a load of laundry and run the dishwasher at the same time? A constant pressure pump is exceptional for these types of low water situations. They can help balance out your water pressure, giving your family the consistent running water pressure it needs.
If you’re unsure of which water pump to install in your home, call the team at Water Pump Dubai today at +971 4 252 2966. We will recommend the right pump for your home’s water system and we can install it as well. Along with water pump replacement, we also service and install water tanks and water wells, and conduct thorough well inspections in Dubai, Sharjah, Abudhabi and all surrounding areas.
1. Submersible Pumps
Submersible pumps are water pumps that sit well below the ground. They are designed to push fluid to the surface as opposed to pulling the fluid toward the house as jet pumps do. Our technicians use only top-notch pumps from manufacturers such as Gould, Sta-Rite, and Grundfos.
2. Sump Pumps
These type of pumps are specifically for basements and crawl spaces. They are perfect for homes that are located in low-lying areas and are susceptible to possible flooding. Sump pumps pull out excess water that builds up in your basement or underneath your home.
3. Jet Pumps
Jet pumps are used primarily in shallow wells, as they can only be installed as low as 25 feet below the ground. They draw water up from the well through the use of suction caused by atmospheric pressure. Jet pumps are mounted above the well either inside your home or in a separate well house.
4. Constant Pressure Pumps
Do you experience times of low water pressure in your home? Is it impossible to do a load of laundry and run the dishwasher at the same time? A constant pressure pump is exceptional for these types of low water situations. They can help balance out your water pressure, giving your family the consistent running water pressure it needs.
If you’re unsure of which water pump to install in your home, call the team at Water Pump Dubai today at +971 4 252 2966. We will recommend the right pump for your home’s water system and we can install it as well. Along with water pump replacement, we also service and install water tanks and water wells, and conduct thorough well inspections in Dubai, Sharjah, Abudhabi and all surrounding areas.
- Published on
Many homeowners don’t take the time to think about their water tanks until a major problem arises. When trouble with your water well system strikes, it’s often too late to perform any minor maintenance services or repairs. This can cause an interruption in your water service for hours or even days. Avoid these types of water issues by having your water tank properly and regularly maintained. Water Pump dubai suggests the following three steps to ensure your water tank performs at its best for many years to come.
1. Install a High-Quality Water Tank
Maintaining a water tank begins with installing a high-quality product. The quality of materials used to produce water pressure tanks can affect how well the tank functions, how long the tank will last, and the taste of your water. We recommend two top-of-the-line tanks: a Flexicon fiberglass water tank. Our professional team has chosen these two brands for both their performance and their longevity.
2. Service Every Two to Three Years
It is highly recommended to have your water tank serviced every two to three years. Not only will this extend the life of your jet pump, it will also keep the water tank itself in the best possible condition. While the water tank is being serviced, it’s a good time for the water tank inspector to catch small repairs that may need to be made. It’s much better to catch these small issues and correct them before large or expensive repairs become necessary.
3. Hire an Experienced Pump Company
An experienced and professional pump company, such as Water Pump Dubai, will perform the following repairs and maintenance tasks on your water tank:
1. Install a High-Quality Water Tank
Maintaining a water tank begins with installing a high-quality product. The quality of materials used to produce water pressure tanks can affect how well the tank functions, how long the tank will last, and the taste of your water. We recommend two top-of-the-line tanks: a Flexicon fiberglass water tank. Our professional team has chosen these two brands for both their performance and their longevity.
2. Service Every Two to Three Years
It is highly recommended to have your water tank serviced every two to three years. Not only will this extend the life of your jet pump, it will also keep the water tank itself in the best possible condition. While the water tank is being serviced, it’s a good time for the water tank inspector to catch small repairs that may need to be made. It’s much better to catch these small issues and correct them before large or expensive repairs become necessary.
3. Hire an Experienced Pump Company
An experienced and professional pump company, such as Water Pump Dubai, will perform the following repairs and maintenance tasks on your water tank:
- Replace the gauge, switch, and release valve, if needed
- Replace any faulty or broken parts on the pump
- Check that all water tank functions are working properly
- Air charge the tank as needed
- Published on
Most water wells can operate for many years with no warning signs of any upcoming problems. By the time your well needs to be inspected, unnecessary damage may have already been done. Call the professionals at Water Pump Dubai at +971 4 252 2966 when you notice the following symptoms in your water system.
1. Air in Your WaterIf your water spurts and sputters when you turn on your faucet, it is possible that unwanted gas or air is somehow sneaking into your well. This could be caused by a broken well pump or a low water table. Sometimes groundwater can contain various types of gasses such as carbon dioxide, methane, or hydrogen sulfide. These elements can be hazardous to your health, making it imperative that your well receives a proper inspection.
2. Sand in Your WaterNo one likes to wash dishes in a sink full of soapy, sandy water. If you find sand in your water, this could be a sign that your water tank is filling up with sand and salt. Sand can wear out your water pump and cause more damage if not corrected quickly.
3. Low Water PressureThere are a variety of causes for low water pressure – a broken or clogged well pump, scaling on the inside of your pipes due to hard water, or a failing pressure tank. Low water pressure causes your faucets to produce less water than normal and also makes the pump cycle on and off more frequently.
4. High Electric BillA well pump that is blocked due to an overwhelming amount of minerals or sand has to work much harder than a correctly working well pump. This causes your water pump to use an enormous amount of energy because it has to constantly run to keep your home supplied with fresh water.
The water well inspectors at water pump dubai have years of experience providing professional water pump service in the UAE areas of Dubai, Sharjah, and Abudhabi. Call us at +971 4 252 2966,or request your water pump inspection today.
1. Air in Your WaterIf your water spurts and sputters when you turn on your faucet, it is possible that unwanted gas or air is somehow sneaking into your well. This could be caused by a broken well pump or a low water table. Sometimes groundwater can contain various types of gasses such as carbon dioxide, methane, or hydrogen sulfide. These elements can be hazardous to your health, making it imperative that your well receives a proper inspection.
2. Sand in Your WaterNo one likes to wash dishes in a sink full of soapy, sandy water. If you find sand in your water, this could be a sign that your water tank is filling up with sand and salt. Sand can wear out your water pump and cause more damage if not corrected quickly.
3. Low Water PressureThere are a variety of causes for low water pressure – a broken or clogged well pump, scaling on the inside of your pipes due to hard water, or a failing pressure tank. Low water pressure causes your faucets to produce less water than normal and also makes the pump cycle on and off more frequently.
4. High Electric BillA well pump that is blocked due to an overwhelming amount of minerals or sand has to work much harder than a correctly working well pump. This causes your water pump to use an enormous amount of energy because it has to constantly run to keep your home supplied with fresh water.
The water well inspectors at water pump dubai have years of experience providing professional water pump service in the UAE areas of Dubai, Sharjah, and Abudhabi. Call us at +971 4 252 2966,or request your water pump inspection today.
