- Published on
A hot water recirculating system is a pump and valve combination that delivers hot water in an instant to any faucet or bath in your home. The pump is installed at the water heater along with the patented under-sink sensor valve that is installed at the fixture located at the furthest distance from the water heater. This combination creates a pressure differential that allows the cold and cool water in the hot water supply line to "by-pass" (at a low volume) into the cold water supply line through the thermostatically controlled sensor valve, keeping the water in the hot water supply line at a "no-wait" temperature throughout the home. A timer on the pump allows the homeowner to control the time where instant hot water will be used. Are There Different Recirculating Pumps Available?
There Are Several Makes and Models of Recirculating Pumps Available:
- A basic “always on” recirculating pump that uses the same amount of energy as a 40 watt light bulb.
- A recirculating pump with a timer allows you to set times when the system is to be on for peak use and efficiency.
- An “on demand” recirculating pump is designed with a remote control that is pushed any time you want to circulate hot water through your system. This type of pump shuts off when it senses that the water at the faucet farthest away from the heater has reached the appropriate temperature (approximately 10 – 15 seconds after you start the pump, depending on the size of the house.)
- Recirculating Pump designed for tankless water heaters. This unit is designed for use with tankless water heaters and is similar in function as the recirculating pump with timer listed above.
- Published on
Full Recirculating Pump System
In this type of system, your plumber will install additional hot water pipes in your home. These pipes can then return the unused hot water to the water heater. As the cooling hot water makes its way back to the water heater, new hot water can take its place so that it is always ready to go when you need it. The hot water flows through a continuous loop throughout your system so that there is a steady supply of hot water, minimizing your wait time and water waste.
If you are concerned about how this constant operation might affect your energy costs for heating the water, there is no need to be. While the system is capable of running continuously, it doesn’t always do this. Most hot water recirculating pumps come with sensors or timers to regulate operation. Sensors can detect the temperature of the hot water in the pipe, only running the recirculation pump when the temperature drops below a specified level. This way, the water won’t keep circulating when the water is already warm, typically stopping itself after one complete cycle.
Timers give you even greater control over when your system operates. For example, you can program your system to automatically turn off after a specified time in the evening so that it isn’t running while you are sleeping. You can also program the schedule to turn the system off when you are at work or go out of town on vacation.
Even if the hot water recirculating pump you choose doesn’t come with a sensor or timer, your plumber can easily install one for you. This way, you’ll get all the benefits of having more control over your system without having to select an entirely new pump system.
During the installation process, your plumber will need to install additional piping throughout your home to carry the unused hot water back to the water heater. This can add to your installation cost considerably, especially if the pipes in your home are difficult to access. If you don’t want to weather the added cost, or if the installation would be too complex, you do have another option.
If you are concerned about how this constant operation might affect your energy costs for heating the water, there is no need to be. While the system is capable of running continuously, it doesn’t always do this. Most hot water recirculating pumps come with sensors or timers to regulate operation. Sensors can detect the temperature of the hot water in the pipe, only running the recirculation pump when the temperature drops below a specified level. This way, the water won’t keep circulating when the water is already warm, typically stopping itself after one complete cycle.
Timers give you even greater control over when your system operates. For example, you can program your system to automatically turn off after a specified time in the evening so that it isn’t running while you are sleeping. You can also program the schedule to turn the system off when you are at work or go out of town on vacation.
Even if the hot water recirculating pump you choose doesn’t come with a sensor or timer, your plumber can easily install one for you. This way, you’ll get all the benefits of having more control over your system without having to select an entirely new pump system.
During the installation process, your plumber will need to install additional piping throughout your home to carry the unused hot water back to the water heater. This can add to your installation cost considerably, especially if the pipes in your home are difficult to access. If you don’t want to weather the added cost, or if the installation would be too complex, you do have another option.
Recirculating Pump Comfort System
To avoid having to install new pipes, you can opt for a hot water recirculating pump that sends unused water back to the water heater through your cold water pipes rather than through a separate pipe system. This option is much more cost-effective and easier to install, making this style of system accessible to a wider range of homeowners. However, you’ll still get the benefit of fast hot water when you need it.
Comfort systems do come with one major drawback, though. Because the hot water will flow back to the water heater through the cold water pipes, the water that comes out of the cold tap at first will likely be warmer than you are used to. It may also take a few moments for the water to get truly cold. In most cases, this won’t be much of an issue, as lukewarm water is perfectly fine for many applications around the house, like cleaning and cooking. However, if you use your tap to provide drinking water, you may have to wait until the water is cool enough to be palatable.
You can combat this issue when you know you are going to need cold water by turning off the pump temporarily. This method is particularly effective during the summer. Because the weather is warmer during this time of year, you won’t need to run the pump as frequently to get hot water anyway, as the water already in the pipes will stay hot longer.
For more info contact pump suppliers in uae or call us at +971 4 252 2966
Comfort systems do come with one major drawback, though. Because the hot water will flow back to the water heater through the cold water pipes, the water that comes out of the cold tap at first will likely be warmer than you are used to. It may also take a few moments for the water to get truly cold. In most cases, this won’t be much of an issue, as lukewarm water is perfectly fine for many applications around the house, like cleaning and cooking. However, if you use your tap to provide drinking water, you may have to wait until the water is cool enough to be palatable.
You can combat this issue when you know you are going to need cold water by turning off the pump temporarily. This method is particularly effective during the summer. Because the weather is warmer during this time of year, you won’t need to run the pump as frequently to get hot water anyway, as the water already in the pipes will stay hot longer.
For more info contact pump suppliers in uae or call us at +971 4 252 2966
- Published on
These systems are designed so that the pump operates only when there's a demand for hot water, such as opening a faucet or drawing a bath. They're equipped with either a remote switch or a motion detector that triggers the pump to switch ON when movement is detected in the hot water line.
Once activated, the water circulates until it reaches the designated temperature; or the pump is manually switched off; or the timer has expired. Depending on the size of your house, these units typically cost between $400 - $600.
Pros
For more info contact pump suppliers in uae or call us at +971 4 252 2966
Once activated, the water circulates until it reaches the designated temperature; or the pump is manually switched off; or the timer has expired. Depending on the size of your house, these units typically cost between $400 - $600.
Pros
- If correctly configured, an On-Demand Circulation Pump can reduce the amount of energy your water heater uses.
- Hot water is delivered rapidly when needed. This will significantly reduce the wasted water and the time you wait for the faucet to deliver hot water.
- On homes that have retrofitted their plumbing system with an On Demand Circulation Pump, there will be reduced crossover of hot water into the cold water pipes.
- The ability to override the motion detector and manually activate the pump.
- On retrofitted plumbing systems it will be necessary to have a power source and a pump at each hot water loop.
- Hot water is delivered quickly, but not instantaneous because the pump will need to be activated.
- The amount of time it takes to deliver hot water depends on your home's plumbing configuration.
For more info contact pump suppliers in uae or call us at +971 4 252 2966
- Published on
Advantage of Installing a Circulation Pump
Hot water circulation pumps have been around for years. Many high-end hotels and restaurants have provided on-demand hot water to their guests as a standard convenience. However, recently more homeowners are beginning to take advantage of the many benefits a circulation pump can provide.
Here are a few of the advantages:
Convenience: A circulation pump delivers hot water almost immediately when the faucet is opened. The ability to have access to nearly instantaneous hot water is probably the number one advantage.
Water Usage: Because hot water is delivered nearly immediately, less water is wasted. When installed, the need for waiting for the water flow to reach your desired temperature is eliminated. This is particularly useful in areas where water is in short supply. A huge benefit of using a circulation pump is it's ability to save a significant amount of water, resulting in a savings of money and time.
Ease of Installation: Installing a circulation pump is relatively easy and you'll likely already have the tools you need. The majority of pump models are designed for the average home plumbing system. In addition, no special permits are required to add a pump to your water heater.
Ease of Operation: As a general rule, circulating pumps are very straightforward and easy to operate.
Selection: Water heater circulation pumps can be found nearly everywhere with a variety of manufacturers and options to choose between.
Disadvantages of Installing a Circulating Pump
The convenience of near-instant hot water has a price, but even so, there really are very few disadvantages to installing a circulating pump.
Initial Cost: There's a wide price range to select from, but it's a good idea to purchase a high-end model. Purchasing a quality pump will help you maximize your savings down the road.
Power Consumption: Many of the earlier circulating pumps worked non-stop and were more expensive to operate because they were constantly using electricity. In addition, they also required your water heater to work harder in order to keep the water hot around the clock. Fortunately, many of the current models are made with energy conservation in mind and are designed to deliver hot water on-demand, rather than running all of the time.
Heat Loss: Since your plumbing will be filled with hot water constantly, you'll experience heat loss from the pipes themselves. However, by insulating your hot water pipes you can keep the heat loss to a minimum.
For more info contact pump suppliers in uae or call us at +971 4 252 2966
Hot water circulation pumps have been around for years. Many high-end hotels and restaurants have provided on-demand hot water to their guests as a standard convenience. However, recently more homeowners are beginning to take advantage of the many benefits a circulation pump can provide.
Here are a few of the advantages:
Convenience: A circulation pump delivers hot water almost immediately when the faucet is opened. The ability to have access to nearly instantaneous hot water is probably the number one advantage.
Water Usage: Because hot water is delivered nearly immediately, less water is wasted. When installed, the need for waiting for the water flow to reach your desired temperature is eliminated. This is particularly useful in areas where water is in short supply. A huge benefit of using a circulation pump is it's ability to save a significant amount of water, resulting in a savings of money and time.
Ease of Installation: Installing a circulation pump is relatively easy and you'll likely already have the tools you need. The majority of pump models are designed for the average home plumbing system. In addition, no special permits are required to add a pump to your water heater.
Ease of Operation: As a general rule, circulating pumps are very straightforward and easy to operate.
Selection: Water heater circulation pumps can be found nearly everywhere with a variety of manufacturers and options to choose between.
Disadvantages of Installing a Circulating Pump
The convenience of near-instant hot water has a price, but even so, there really are very few disadvantages to installing a circulating pump.
Initial Cost: There's a wide price range to select from, but it's a good idea to purchase a high-end model. Purchasing a quality pump will help you maximize your savings down the road.
Power Consumption: Many of the earlier circulating pumps worked non-stop and were more expensive to operate because they were constantly using electricity. In addition, they also required your water heater to work harder in order to keep the water hot around the clock. Fortunately, many of the current models are made with energy conservation in mind and are designed to deliver hot water on-demand, rather than running all of the time.
Heat Loss: Since your plumbing will be filled with hot water constantly, you'll experience heat loss from the pipes themselves. However, by insulating your hot water pipes you can keep the heat loss to a minimum.
For more info contact pump suppliers in uae or call us at +971 4 252 2966
- Published on
1. Get a professional to inspect your water pump.
Why replace what you can repair? Before you buy a new water pump or schedule installation, be sure to have a professional assess the condition of your pump. We at Pump suppliers uae know that buying and installing a new water pump can be a large, unexpected cost, and water pump repairs can cost you significantly less money.
2. Research your water pump options.
If you do need water pump replacement, then be sure to do a bit of research before making the purchase. You may decide to replace your old pump with a submersible pump, a constant pressure pump, or even a jet pump. Each water pump is designed for specific purposes, so consult with us on which one would be best for your home.
3. Choose a quality water pump.
You know the saying: You get what you pay for. We recommend that you choose a high-quality water pump over less-expensive, cheaply made models that don’t give you the same results or guarantees.
4. Don’t be a lone ranger.Unless you’re certified in water pump replacement, we don’t suggest that this task become a DIY project. At pump suppliers in uae, our technicians have training and experience in water pump installation and repairs.
Why replace what you can repair? Before you buy a new water pump or schedule installation, be sure to have a professional assess the condition of your pump. We at Pump suppliers uae know that buying and installing a new water pump can be a large, unexpected cost, and water pump repairs can cost you significantly less money.
2. Research your water pump options.
If you do need water pump replacement, then be sure to do a bit of research before making the purchase. You may decide to replace your old pump with a submersible pump, a constant pressure pump, or even a jet pump. Each water pump is designed for specific purposes, so consult with us on which one would be best for your home.
3. Choose a quality water pump.
You know the saying: You get what you pay for. We recommend that you choose a high-quality water pump over less-expensive, cheaply made models that don’t give you the same results or guarantees.
4. Don’t be a lone ranger.Unless you’re certified in water pump replacement, we don’t suggest that this task become a DIY project. At pump suppliers in uae, our technicians have training and experience in water pump installation and repairs.
- Published on
1. Start with a quality pump.
If your water pump has seen better days or if it’s sub-par, you may want to consider replacing it with a reliable and durable one. At pump supplier uae, we can assess your home’s needs and suggest a quality water pump that will give you peace of mind for years to come. Plus, our team can expertly install it so you can be off to a good start.
2. Don’t ignore the warning signs.
Suddenly, you notice that your water isn’t running with the force it once was, or perhaps it’s coming out of the faucet a bit discolored. Either way, you know something is different. Instead of shrugging your shoulders at those warning signs, call a professional. You could be dealing with a water pump or well issue that you don’t want to ignore. The longer you wait, the worse it could get.
3. Schedule regular maintenance.
Your best line of defense for keeping your water pump in top condition is to have it serviced regularly by a professional. The National Ground Water Association recommends that you get an inspection of your overall well system each year to make sure everything is functioning as it should.
For more info contact pump suppliers in uae or call us at +971 4 252 2996
If your water pump has seen better days or if it’s sub-par, you may want to consider replacing it with a reliable and durable one. At pump supplier uae, we can assess your home’s needs and suggest a quality water pump that will give you peace of mind for years to come. Plus, our team can expertly install it so you can be off to a good start.
2. Don’t ignore the warning signs.
Suddenly, you notice that your water isn’t running with the force it once was, or perhaps it’s coming out of the faucet a bit discolored. Either way, you know something is different. Instead of shrugging your shoulders at those warning signs, call a professional. You could be dealing with a water pump or well issue that you don’t want to ignore. The longer you wait, the worse it could get.
3. Schedule regular maintenance.
Your best line of defense for keeping your water pump in top condition is to have it serviced regularly by a professional. The National Ground Water Association recommends that you get an inspection of your overall well system each year to make sure everything is functioning as it should.
For more info contact pump suppliers in uae or call us at +971 4 252 2996
- Published on
What’s the point of water tank service?
Your water tank has a life expectancy. It will not last forever. In fact, most things in your home, need preventative maintenance to be at their best. Just like you (should) go to those once-a-year physical exams with your family doctor, you should also stay on top of your water tank’s health by getting it serviced.
How often should I have my water tank serviced?
Because there isn’t a hard-and-fast rule when it comes to water tank service, here’s what we tell most of our customers: Get your water tank serviced every two to three years.
What happens at a service appointment?
During a routine water tank service appointment, you can expect our technicians to:
For more info contact pump suppliers in uae or call us at +971 4 252 2966
Your water tank has a life expectancy. It will not last forever. In fact, most things in your home, need preventative maintenance to be at their best. Just like you (should) go to those once-a-year physical exams with your family doctor, you should also stay on top of your water tank’s health by getting it serviced.
How often should I have my water tank serviced?
Because there isn’t a hard-and-fast rule when it comes to water tank service, here’s what we tell most of our customers: Get your water tank serviced every two to three years.
What happens at a service appointment?
During a routine water tank service appointment, you can expect our technicians to:
- Replace the gauge, release valve, or switch (as needed).
- Check the overall functioning of the water tank and suggest upgrades/repairs (as needed).
- Replace any other parts that are past their prime.
- Air charge the water tank.
For more info contact pump suppliers in uae or call us at +971 4 252 2966
- Published on
Choosing the correct pump for residential usage in dubai is not an easy job. The choice differs from one house to another. If you experience irregularities and scattered directions in the flow of water, it means that there are mainly two considerations needed to be taken into account for overcoming the problems.
If you are looking to extend your home or planning to set up a new water system it would be a smart choice to install a larger pump to cope with the demand. Installing new pumps will ensure correct and adequate water flow to every outlet in the house. It would provide a consistent and continuous flow.
Always remember, switch on your pump only if the water tank holds enough water in it. If the water level is low, air gaps can form in the pipeline which may cause damage to the pump. You might need to replace the entire pump if the water chamber in the pump fills with air. This is why always check the water tank before switching on your pump. You can also install a sensor inside the tank. The sensor comes with an alarming bell which is attached outside the tank. When the water level reaches the sensor, the bell starts to ring. This way you can be aware of the water level without opening the tank.
Finally, the sound of the pump really matters a lot. There are some pumps which have smaller pressure tanks and this creates lot of noise which can be disturbing. Moreover, a pump which creates loud noises consume a large amount of electricity. Therefore, to minimise this, you need to buy an energy saving pump. It comes with a large pressure tank to reduce the extra noise and electricity.
Thus, you can see that installing a perfect pump in your home must be configured properly. However, it can be made easy if you hire a pump suppliers in UAE or call us at +971 4 252 2966
If you are looking to extend your home or planning to set up a new water system it would be a smart choice to install a larger pump to cope with the demand. Installing new pumps will ensure correct and adequate water flow to every outlet in the house. It would provide a consistent and continuous flow.
Always remember, switch on your pump only if the water tank holds enough water in it. If the water level is low, air gaps can form in the pipeline which may cause damage to the pump. You might need to replace the entire pump if the water chamber in the pump fills with air. This is why always check the water tank before switching on your pump. You can also install a sensor inside the tank. The sensor comes with an alarming bell which is attached outside the tank. When the water level reaches the sensor, the bell starts to ring. This way you can be aware of the water level without opening the tank.
- The first and the foremost consideration is to repair the existing pump. A low grade pump can lead to such problems.
- The second thing is to determine the pump’s horsepower. Generally, the horsepower is mentioned on the body of the pump, but in case you do not find one, it is better to call pump suppliers in uae .
Finally, the sound of the pump really matters a lot. There are some pumps which have smaller pressure tanks and this creates lot of noise which can be disturbing. Moreover, a pump which creates loud noises consume a large amount of electricity. Therefore, to minimise this, you need to buy an energy saving pump. It comes with a large pressure tank to reduce the extra noise and electricity.
Thus, you can see that installing a perfect pump in your home must be configured properly. However, it can be made easy if you hire a pump suppliers in UAE or call us at +971 4 252 2966
- Published on
What is a Sump Pump?
The trusty sump pump is installed underneath the floor of basements and crawl spaces to collect groundwater before it can threaten to flood your home. Groundwater can easily rise through the cracks in the foundation of your home during long periods of rain. If there is a possibility that flooding can occur in your basement or crawl space, the sump pump will collect all of this weather and redirect it away from your home. Think of it as an additional piece of flood insurance!
Do I Need One in My Home?
Does your basement or crawl space experience below-ground wetness and moisture?. Experiencing moisture in this area of your home could be due to foundation cracks that could eventually lead to flooding if there’s enough rain or improper drainage of water from the gutter system. Additionally, a sump pump should always be installed if your home is located in a flood zone.
A homeowner that has a basement or crawl space shouldn’t just know what a sump pump is, they should have one installed in their home! If you’re currently looking to install sump pump, contact Pump Suppliers in UAE. To learn more about sump pumps or to schedule an appointment, give us a call at +971 4 252 2966.
The trusty sump pump is installed underneath the floor of basements and crawl spaces to collect groundwater before it can threaten to flood your home. Groundwater can easily rise through the cracks in the foundation of your home during long periods of rain. If there is a possibility that flooding can occur in your basement or crawl space, the sump pump will collect all of this weather and redirect it away from your home. Think of it as an additional piece of flood insurance!
Do I Need One in My Home?
Does your basement or crawl space experience below-ground wetness and moisture?. Experiencing moisture in this area of your home could be due to foundation cracks that could eventually lead to flooding if there’s enough rain or improper drainage of water from the gutter system. Additionally, a sump pump should always be installed if your home is located in a flood zone.
A homeowner that has a basement or crawl space shouldn’t just know what a sump pump is, they should have one installed in their home! If you’re currently looking to install sump pump, contact Pump Suppliers in UAE. To learn more about sump pumps or to schedule an appointment, give us a call at +971 4 252 2966.
- Published on
Manufacturers design submersible pumps to be safe. For instance, they encase them in cast-iron housing designed to isolate the electrical and working parts of the unit. All cables are shielded and sealed by standard rubber. However, both the casing and the rubber shielding does not guarantee that the submersible water pump will never have any contact with water.
1. Water Seals
The rubber water seals on a submersible pump contain no adhesive. Instead, they form the seal due to a crimping method that tightens components within the pump. The seal insulates the inside of the pump from water, humidity, and outside air.
While this produces a high level of insulation, occasional seal failures can occur. A tiny malfunction can bring the inside of the pump into contact with the water garden or natural pond water. The result of this malfunction would be electrified water inside the pond.
2. The Cables
Like the main components of the pump, manufacturers go to great lengths to properly seal the cables. For instance, they will fill gaps with epoxy to prevent water from invading the unit. They also wrap the cables in a neoprene, which is both air and watertight.
Epoxy is incredibly effective at forming a waterproof seal. This seal will not fail unless it is subjected to some form of impact that would cause it to crack. If the seal cracks, water might get into the cable. The same is true for neoprene.
3. Regular Outlets vs. GFCI Receptacles
Both the National Electric Code (NEC) and OSHA require that all homes now contain GFCI receptacles in areas where water exists or potentially exists. These areas include bathrooms, kitchens, utility rooms, garages, and anywhere outside. GFCI receptacles prevent electrocution by cutting off the power source when an unusual increase or “leakage” in power, like that caused when water comes into contact with electricity, is detected.
Unfortunately, many older homes do not have GFCI receptacles. As a result, plugging an electric water pump into a regular outlet can make it vulnerable to a power surge. It can also increase the risk of electric shock. Therefore, if you use an electric pump, you must make sure that you plug it into a GFCI receptacle or replace your old outlet.
4. Freezing Temperatures During the Winter
During the winter, it is a good idea to remove the water pump from your water garden or natural pond. Winters in Illinois produce frigid temperatures that can plummet below zero. As a result, the water in a natural pond or water garden may stay frozen throughout the season.
Frozen water can take its toll on a submersible water pump. Just one freeze can cause the casing or the cabling to crack open, exposing the electrical parts. You may not notice the cracks due to the multilayers of the casing. Therefore, when you turn on the pump in the springtime, you may be vulnerable to electric shock.
5. Abrasives and Heavy Objects
Since most natural ponds or water gardens contain rocks, plants, sand, and other objects, it is important to ensure that they do not come into contact with the water pump.
When placing your pump, be sure to isolate it from any heavy rocks, sharp objects, or metal objects. Also, if you use sand, position the pump so that it is filtering the least amount of sand possible. Since sand is abrasive, it can damage the inner parts of the pump over time.
6. Never swim or wade in a pond with a Submersible Water Pump
You should never swim or wade in a pond or pool with a submersible pump. Even though these pumps are designed with many safety features, it is not worth the risk. There are special pumps designed for swimming pools and ponds that do not carry this risk. If you need to enter your pond or pools with a submersible water pump to retrieve something or perform routine maintenance it is critical that you turn off the electricity to the submersible pump and enter with caution.
For more info contact submersible pump suppliers in uae or call us at +971 4 252 2966
1. Water Seals
The rubber water seals on a submersible pump contain no adhesive. Instead, they form the seal due to a crimping method that tightens components within the pump. The seal insulates the inside of the pump from water, humidity, and outside air.
While this produces a high level of insulation, occasional seal failures can occur. A tiny malfunction can bring the inside of the pump into contact with the water garden or natural pond water. The result of this malfunction would be electrified water inside the pond.
2. The Cables
Like the main components of the pump, manufacturers go to great lengths to properly seal the cables. For instance, they will fill gaps with epoxy to prevent water from invading the unit. They also wrap the cables in a neoprene, which is both air and watertight.
Epoxy is incredibly effective at forming a waterproof seal. This seal will not fail unless it is subjected to some form of impact that would cause it to crack. If the seal cracks, water might get into the cable. The same is true for neoprene.
3. Regular Outlets vs. GFCI Receptacles
Both the National Electric Code (NEC) and OSHA require that all homes now contain GFCI receptacles in areas where water exists or potentially exists. These areas include bathrooms, kitchens, utility rooms, garages, and anywhere outside. GFCI receptacles prevent electrocution by cutting off the power source when an unusual increase or “leakage” in power, like that caused when water comes into contact with electricity, is detected.
Unfortunately, many older homes do not have GFCI receptacles. As a result, plugging an electric water pump into a regular outlet can make it vulnerable to a power surge. It can also increase the risk of electric shock. Therefore, if you use an electric pump, you must make sure that you plug it into a GFCI receptacle or replace your old outlet.
4. Freezing Temperatures During the Winter
During the winter, it is a good idea to remove the water pump from your water garden or natural pond. Winters in Illinois produce frigid temperatures that can plummet below zero. As a result, the water in a natural pond or water garden may stay frozen throughout the season.
Frozen water can take its toll on a submersible water pump. Just one freeze can cause the casing or the cabling to crack open, exposing the electrical parts. You may not notice the cracks due to the multilayers of the casing. Therefore, when you turn on the pump in the springtime, you may be vulnerable to electric shock.
5. Abrasives and Heavy Objects
Since most natural ponds or water gardens contain rocks, plants, sand, and other objects, it is important to ensure that they do not come into contact with the water pump.
When placing your pump, be sure to isolate it from any heavy rocks, sharp objects, or metal objects. Also, if you use sand, position the pump so that it is filtering the least amount of sand possible. Since sand is abrasive, it can damage the inner parts of the pump over time.
6. Never swim or wade in a pond with a Submersible Water Pump
You should never swim or wade in a pond or pool with a submersible pump. Even though these pumps are designed with many safety features, it is not worth the risk. There are special pumps designed for swimming pools and ponds that do not carry this risk. If you need to enter your pond or pools with a submersible water pump to retrieve something or perform routine maintenance it is critical that you turn off the electricity to the submersible pump and enter with caution.
For more info contact submersible pump suppliers in uae or call us at +971 4 252 2966
