- Published on
Rainwater is an excellent free resource with many great applications. We use it to keep our gardens green and healthy, to lead a sustainable lifestyle, to save money and to reduce or eliminate our reliance on public water supplies.
Whatever specific needs that you are using your rainwater tank for, it is critical that your rainwater is as clean and pure as it can possibly be. This becomes even more important when you live somewhere that is exposed to pollutants, such as a city.
The most important first step to water that is always clean and free of impurities is to begin with a high-quality Poly Water Tank and associated accessories, such as water tank pumps and filters. You should also have your entire rainwater system installed by a licensed plumber according to the manufacturer's instructions.
Next, spend the time to make sure that your down pipes and gutters are kept clean and free of leaves and other forms of debris. Also be sure to regularly clean and replace your inlet mesh.
The installation of a filter and diverter between your house and your pump is the next step, which will ensure that you minimize any grit or sand that can get into your washing machine or toilet as part of the collected rainwater.
You should check on your inlet strainer weekly, and your filter cartridge and pump every three months. You will need to change your filter cartridge every six to nine months and rinse your strainers to keep them clean from leaf litter and dust. If you bought a cover for your water tank pump, it will aid you in keeping the pump clean and operating effectively, and help the the noise reduction of your pump's motor.
If you use an underground tank and a back-up connection to the public water system, then your plumber should inspect the back-flow prevention valves once each year.
When rainfall is scarce, there can often be a build up of sludge that will lower the quality of the rainwater held in your tank. Even when rain is not scarce, it is still possible to have sludge build up from not flushing your tank with rainwater. If the rainwater in your tank is being regularly refreshed from new rainfall, which contains fresh oxygen, then this will only apply to the area above the outlet.
Even with strainers and filters, microscopic organic particles will enter your rainwater tank, and then proceed to accumulate at your tank's bottom. This accumulation will become a layer of sludge because the bottom of your rainwater tank is an anaerobic zone, without oxygenation. Too much of this sludge will affect the quality of the rainwater in your tank, and will need to be removed only if the tank water is used for human consumption.
Ideally you want to check the bottom of your tank once every two to three years as part of a routine maintenance plan.
Regular maintenance programs for pumps and rainwater tanks save owners money and time, and can usually be arranged with the plumber who installed the system. If not, there are always plumbers who are willing to take on a maintenance and repair contract for a rainwater tank and pump system.
Your small initial investment into a rainwater tank will offer you many years of healthy and free rainwater. All it takes is a small amount of looking after on your part.
For More info contact GRP tank suppliers in dubai or call us at +9714 252 2966
Whatever specific needs that you are using your rainwater tank for, it is critical that your rainwater is as clean and pure as it can possibly be. This becomes even more important when you live somewhere that is exposed to pollutants, such as a city.
The most important first step to water that is always clean and free of impurities is to begin with a high-quality Poly Water Tank and associated accessories, such as water tank pumps and filters. You should also have your entire rainwater system installed by a licensed plumber according to the manufacturer's instructions.
Next, spend the time to make sure that your down pipes and gutters are kept clean and free of leaves and other forms of debris. Also be sure to regularly clean and replace your inlet mesh.
The installation of a filter and diverter between your house and your pump is the next step, which will ensure that you minimize any grit or sand that can get into your washing machine or toilet as part of the collected rainwater.
You should check on your inlet strainer weekly, and your filter cartridge and pump every three months. You will need to change your filter cartridge every six to nine months and rinse your strainers to keep them clean from leaf litter and dust. If you bought a cover for your water tank pump, it will aid you in keeping the pump clean and operating effectively, and help the the noise reduction of your pump's motor.
If you use an underground tank and a back-up connection to the public water system, then your plumber should inspect the back-flow prevention valves once each year.
When rainfall is scarce, there can often be a build up of sludge that will lower the quality of the rainwater held in your tank. Even when rain is not scarce, it is still possible to have sludge build up from not flushing your tank with rainwater. If the rainwater in your tank is being regularly refreshed from new rainfall, which contains fresh oxygen, then this will only apply to the area above the outlet.
Even with strainers and filters, microscopic organic particles will enter your rainwater tank, and then proceed to accumulate at your tank's bottom. This accumulation will become a layer of sludge because the bottom of your rainwater tank is an anaerobic zone, without oxygenation. Too much of this sludge will affect the quality of the rainwater in your tank, and will need to be removed only if the tank water is used for human consumption.
Ideally you want to check the bottom of your tank once every two to three years as part of a routine maintenance plan.
Regular maintenance programs for pumps and rainwater tanks save owners money and time, and can usually be arranged with the plumber who installed the system. If not, there are always plumbers who are willing to take on a maintenance and repair contract for a rainwater tank and pump system.
Your small initial investment into a rainwater tank will offer you many years of healthy and free rainwater. All it takes is a small amount of looking after on your part.
For More info contact GRP tank suppliers in dubai or call us at +9714 252 2966
- Published on
Synthetic or FRP storage tanks have evolved the warehousing of materials across the world. FRP storage tank manufacturers recommend their clients using storage tank for food, water, liquids, chemicals, and other materials. In this post, they will talk about the failures and preventive measures for plastic tank.
At manufacturing unit, you can find distinct types of plastic tanks in sorts of sizes and capacities. You can store from 100 liters of water to thousands of liters of other materials in the FRP storage tank. Manufacturers have made the life of their consumers easy by bringing this range of products. These tanks can be categorized into –
Double wall storage tanks, brine tanks, and underground plastic tanks are some widely accepted storage options used by industries for storing chemicals.
Other than these tanks, there are vertical tanks and horizontal tanks available on request. Vertical tanks are used for storing stationary and horizontal designs are for transportation purposes.
Tanks usually crack when you misuse them. You need to make the material choice first before selecting storage tank. For instance, if you want to store water, you can get any plastic tank, but if you want to store chemicals, you need to visit GRP storage tank manufacturers and get the suitable storage tank that meet your requirements and budget. For more queries, you can mail to the experts and wait for their response.
At manufacturing unit, you can find distinct types of plastic tanks in sorts of sizes and capacities. You can store from 100 liters of water to thousands of liters of other materials in the FRP storage tank. Manufacturers have made the life of their consumers easy by bringing this range of products. These tanks can be categorized into –
- Food and milk storage plastic tanks
- Chemical storage tanks
Double wall storage tanks, brine tanks, and underground plastic tanks are some widely accepted storage options used by industries for storing chemicals.
- GRP tanks
Other than these tanks, there are vertical tanks and horizontal tanks available on request. Vertical tanks are used for storing stationary and horizontal designs are for transportation purposes.
Tanks usually crack when you misuse them. You need to make the material choice first before selecting storage tank. For instance, if you want to store water, you can get any plastic tank, but if you want to store chemicals, you need to visit GRP storage tank manufacturers and get the suitable storage tank that meet your requirements and budget. For more queries, you can mail to the experts and wait for their response.
- Published on
When you’re looking to decide on what kind of water tank is best for you, it is worth considering a GRP water tank. They offer superior quality when looking for industrial water storage tanks. The acronym stands for Glass-Reinforced Plastic, which is a material formed by reinforcing three-dimensionally meshed Duroplastic with glass fibres. The result is a substance that has the combined properties of steel and plastic, as it is perfect for harsh environments, yet ensures a high level of safety. They are square or rectangular and there are many benefits to picking this type of water tank.
Protects Against Corrosion
Usually, corrosion may occur in water tanks from a build-up of bacteria. However, in GRP water tanks they are fitted with either 25mm, 50mm, 75mm or 100mm insulation. The benefit of having this insulation fitted is that the contents are protected from either extreme of heat or cold. This reduces any excessive temperature fluctuations which may otherwise occur, and would normally increase the risk of bacteria. Additionally, less bacteria also means that the water tanks are considered odor-proof
Extremely Long-lasting
These water tanks are supplied as one piece, meaning from their shipment to their delivery, they are one whole product rather than into sections which you would need to connect together. The result is a water tank that is extremely durable, with no weaker parts, seals, or joins. Due to its durability it is able to last longer, making it a worthwhile investment.
Recyclable
The materials used for this type of water tank are CFC and HCFC free. This means that it is possible to recycle them in the future by melting them down and reforming. This ensures that there is a life beyond the use of these water tank, and you can know that it is not harming the environment. Especially considering the environmental benefits of using a water tank, we know that this is an important point for our customers.
Permanently Stable
Many are surprised about how lightweight the GRP tanks supplied are, meaning that they are easy to handle. Despite this, their material makes them strong and durable, ensuring that they are always able to remain stable and secure.
Functionality
Our GRP water tanks are able to accommodate tank connections and fittings with our standard positioned pre-formed cut-outs. We are also able to make changes depending on your preferences to enable it to meet the required function. Special sizes might include an L-shaped tank, or a tapered tank or cistern, as well as any other particular specification. They are able to hold various sizes from 10 - 11,250 Gallons or 45 - 90,000 Litres.
For more info contact GRP tank Suppliers in Dubai or call us at +971 4 252 2966
Protects Against Corrosion
Usually, corrosion may occur in water tanks from a build-up of bacteria. However, in GRP water tanks they are fitted with either 25mm, 50mm, 75mm or 100mm insulation. The benefit of having this insulation fitted is that the contents are protected from either extreme of heat or cold. This reduces any excessive temperature fluctuations which may otherwise occur, and would normally increase the risk of bacteria. Additionally, less bacteria also means that the water tanks are considered odor-proof
Extremely Long-lasting
These water tanks are supplied as one piece, meaning from their shipment to their delivery, they are one whole product rather than into sections which you would need to connect together. The result is a water tank that is extremely durable, with no weaker parts, seals, or joins. Due to its durability it is able to last longer, making it a worthwhile investment.
Recyclable
The materials used for this type of water tank are CFC and HCFC free. This means that it is possible to recycle them in the future by melting them down and reforming. This ensures that there is a life beyond the use of these water tank, and you can know that it is not harming the environment. Especially considering the environmental benefits of using a water tank, we know that this is an important point for our customers.
Permanently Stable
Many are surprised about how lightweight the GRP tanks supplied are, meaning that they are easy to handle. Despite this, their material makes them strong and durable, ensuring that they are always able to remain stable and secure.
Functionality
Our GRP water tanks are able to accommodate tank connections and fittings with our standard positioned pre-formed cut-outs. We are also able to make changes depending on your preferences to enable it to meet the required function. Special sizes might include an L-shaped tank, or a tapered tank or cistern, as well as any other particular specification. They are able to hold various sizes from 10 - 11,250 Gallons or 45 - 90,000 Litres.
For more info contact GRP tank Suppliers in Dubai or call us at +971 4 252 2966
- Published on
What is a GRP Water Tank?
A Glass Reinforced Plastic Water Tank, or GRP Water Tank, is a water storage unit made from glass reinforced plastic, the material also known as fibreglass. Glass Reinforced Plastic is produced through layering and combining glass fibres; the individual fibres are woven together to produce a flexible material that is placed into a mould, where polyester resin is added to the material, strengthening the fibreglass fabric to its final, rigid state. This process produces extremely strong and durable, yet light GRP Water Tanks, which can endure harsh environments such as extreme cold, heat and rain without degrading or falling into disrepair. It is this durability and resistance to the elements that make GRP Tanks a modern replacement to older steel or aluminium water tanks which were once the industry standard.
Resistance to the elements
One of the most popular reasons behind companies upgrading to GRP Tanks are their durability and resistance to adverse temperatures and weather. Over time, many metals, including steel and aluminium, can corrode due to persistent attacks from the cold, the heat, rain or snow, all common instances of adverse weather we experience in the UK. GRP Tanks provide a means to store water, or other substances depending on the tank purchased, with minimal maintenance. GRP Water Tanks do not require regular coatings of protective paints or material repairs due to its resistance to corrosion.
Structural Durability
GRP Water Tanks provide structural integrity across their entire body, due to the GRP Tanks being manufactured as one-piece products. This means there aren’t any welds, seals or rivets that can degrade or weaken over time. Moreover, GRP Water Tanks offer excellent load-bearing qualities without weighing as much as metallic alternatives, meaning you can store the GRP Water Tanks without having to spend as much on extra structural supports to bear the load of the tank and its contents. What’s more, due to GRP Water Tanks having inherent UV resistance, the structural integrity is not lost over time from sun exposure.
Design Innovation
Given that GRP Water Tanks are moulded products, they can be manufactured in a variety of different shapes, sizes and colours, depending on the needs of your business. We supply GRP Water Tanks in special shapes, such as L Shaped tanks, or in a specific colour for specific contents to make tank identification easier for your employees. GRP Water Tanks can also be modified for different connections or fittings in no time at all, as cut outs can be done with common plumbing tools to the sides or bottom without jeopardising the structural integrity of the tank.
Versatility
GRP Tanks can be produced to store water, or other chemicals at varying concentrations, depending on your business needs. The tanks can be specially manufactured with specific, stronger resins than are normally used on standard tanks in order to accommodate for this. Simply contacting us to discuss your chemical tank requirements can adapt these tanks to your business needs. GRP Water Tanks can also be purchased pre-insulated, protecting the contents from extremes in temperature, which can be perfect in preventing bacteria growth or maintaining the contents and at constant temperature.
For more info contact GRP tank UAE or Call us at +971 4 252 2966
A Glass Reinforced Plastic Water Tank, or GRP Water Tank, is a water storage unit made from glass reinforced plastic, the material also known as fibreglass. Glass Reinforced Plastic is produced through layering and combining glass fibres; the individual fibres are woven together to produce a flexible material that is placed into a mould, where polyester resin is added to the material, strengthening the fibreglass fabric to its final, rigid state. This process produces extremely strong and durable, yet light GRP Water Tanks, which can endure harsh environments such as extreme cold, heat and rain without degrading or falling into disrepair. It is this durability and resistance to the elements that make GRP Tanks a modern replacement to older steel or aluminium water tanks which were once the industry standard.
Resistance to the elements
One of the most popular reasons behind companies upgrading to GRP Tanks are their durability and resistance to adverse temperatures and weather. Over time, many metals, including steel and aluminium, can corrode due to persistent attacks from the cold, the heat, rain or snow, all common instances of adverse weather we experience in the UK. GRP Tanks provide a means to store water, or other substances depending on the tank purchased, with minimal maintenance. GRP Water Tanks do not require regular coatings of protective paints or material repairs due to its resistance to corrosion.
Structural Durability
GRP Water Tanks provide structural integrity across their entire body, due to the GRP Tanks being manufactured as one-piece products. This means there aren’t any welds, seals or rivets that can degrade or weaken over time. Moreover, GRP Water Tanks offer excellent load-bearing qualities without weighing as much as metallic alternatives, meaning you can store the GRP Water Tanks without having to spend as much on extra structural supports to bear the load of the tank and its contents. What’s more, due to GRP Water Tanks having inherent UV resistance, the structural integrity is not lost over time from sun exposure.
Design Innovation
Given that GRP Water Tanks are moulded products, they can be manufactured in a variety of different shapes, sizes and colours, depending on the needs of your business. We supply GRP Water Tanks in special shapes, such as L Shaped tanks, or in a specific colour for specific contents to make tank identification easier for your employees. GRP Water Tanks can also be modified for different connections or fittings in no time at all, as cut outs can be done with common plumbing tools to the sides or bottom without jeopardising the structural integrity of the tank.
Versatility
GRP Tanks can be produced to store water, or other chemicals at varying concentrations, depending on your business needs. The tanks can be specially manufactured with specific, stronger resins than are normally used on standard tanks in order to accommodate for this. Simply contacting us to discuss your chemical tank requirements can adapt these tanks to your business needs. GRP Water Tanks can also be purchased pre-insulated, protecting the contents from extremes in temperature, which can be perfect in preventing bacteria growth or maintaining the contents and at constant temperature.
For more info contact GRP tank UAE or Call us at +971 4 252 2966
- Published on
Circumstances can make choosing the right water tank for your application difficult. It may be that access to an area is restricted, or replacing a defective water tank involves altering the building’s structure. In such cases sectional water tanks are often an excellent solution, being used in hotels, schools and hospitals across the world.
While sectional water tanks are often more expensive than one piece water tanks or semi-sectional tanks, solutions which we would always recommend considering first, they can definitely be worth it. There are three main types of sectional water tanks offered by companies, depending on the conditions of your site and access restrictions. These are:
Externally Flanged Base
E.F.B. sectional water tanks are designed to be installed on raised supports such as dwarf walls or steel beams, allowing access to joints and connections underneath the tank such as flanges and fasteners. This type of water tank is typically used to allow positive pressure head to an adjacent pump or related equipment. The benefits of E.F.B water tanks is that they can be fully drained without requiring any pumps; as their connections can be accessed from the outside of the tank they are also easier to maintain. However, these tanks often require you to have no space restrictions due to their size.
Internally Flanged Base
Internally flanged base water tanks are designed for positioning on a fully flat supporting base/foundation or levelled steel beams, with all flanges and fasteners located within the inside of the tank. As the fixtures are only available from the inside, these sectional water tanks cannot be fully drained unless you use a pump. However, because you don’t need to access base panels to use them, I.F.B. tanks allow extra headroom, making them ideally suited for areas where height or headroom is restricted.
Totally Internally Flanged
True to their name, totally internally flanged water tanks are designed with all flanges on the inside of the tank. This allows them to be constructed at maximum capacity, offering a size advantage over the other two types of sectional water tanks, and aids installation in areas where assembly space around the tank is extremely restricted. These versatile sectional water tanks can be manufactured and designed according to your exact site requirements, making them the ideal solution when a bespoke solution is needed.
For more info contact GRP tank suppliers in UAE or call us at +971 4 252 2966
While sectional water tanks are often more expensive than one piece water tanks or semi-sectional tanks, solutions which we would always recommend considering first, they can definitely be worth it. There are three main types of sectional water tanks offered by companies, depending on the conditions of your site and access restrictions. These are:
- Externally Flanged Base (E.F.B)
- Internally Flanged Base (I.F.B)
- Totally Internally Flanged (T.I.F)
Externally Flanged Base
E.F.B. sectional water tanks are designed to be installed on raised supports such as dwarf walls or steel beams, allowing access to joints and connections underneath the tank such as flanges and fasteners. This type of water tank is typically used to allow positive pressure head to an adjacent pump or related equipment. The benefits of E.F.B water tanks is that they can be fully drained without requiring any pumps; as their connections can be accessed from the outside of the tank they are also easier to maintain. However, these tanks often require you to have no space restrictions due to their size.
Internally Flanged Base
Internally flanged base water tanks are designed for positioning on a fully flat supporting base/foundation or levelled steel beams, with all flanges and fasteners located within the inside of the tank. As the fixtures are only available from the inside, these sectional water tanks cannot be fully drained unless you use a pump. However, because you don’t need to access base panels to use them, I.F.B. tanks allow extra headroom, making them ideally suited for areas where height or headroom is restricted.
Totally Internally Flanged
True to their name, totally internally flanged water tanks are designed with all flanges on the inside of the tank. This allows them to be constructed at maximum capacity, offering a size advantage over the other two types of sectional water tanks, and aids installation in areas where assembly space around the tank is extremely restricted. These versatile sectional water tanks can be manufactured and designed according to your exact site requirements, making them the ideal solution when a bespoke solution is needed.
For more info contact GRP tank suppliers in UAE or call us at +971 4 252 2966
- Published on
GRP is a composite material made of plastic reinforced by glass fibres. One of the advantages of GRP is that it is lightweight, as well as being water and corrosion-resistant material; making it ideal for tanks.
There are many other reasons why GRP products are worth your consideration. Here’s five other reasons why you should be interested in our range of GRP products:
Designed to meet stringent regulations
Our GRP one-piece water tanks are specifically designed to meet stringent water regulations, guaranteeing that they are fully equipped to fulfil their purpose. This mark of quality has led GRP water tanks to be used by a wide variety of clients including county and district councils, consulting engineers and architects.
Suitable for various applications
Another reason we recommend GRP tanks is due to their flexibility. We can manufacture GRP tanks made from three different resins, depending on our clients’ needs. While our standard water tanks are suitable for constant water temperatures of up to 40 degrees Celsius, our feed and expansion tanks can handle water up to 70 degrees while our chemical tanks can handle water up to boiling point.
True to their name, specialist chemical tanks are most adept at handling chemicals at varying concentrations. We can also provide rainwater and open tanks.
Available in numerous sizes and shapes
GRP tanks are useful for not being in a standardised size. Our range of water tanks varies from as small as 45 litres right up to 97,500 Litres. No matter how much storage you need, there will be the right GRP tank for you. It is also possible to cut GRP tanks into irregular shapes such as L shapes, making them easy to fit into unusual spaces.
Can be pre-insulated
It is often vital to protect water tanks from heat and cold damage. This is because excessive temperature changes can lead to ruinous bacterial growth in the tank. GRP tanks can easily be pre-insulated against damage using polyurethane insulation foam on the lid and sides of the tank. The thickness of the foam can be varied depending on the amount of protection required.
Can be provided with covering and housing
Sometimes insulation may not be enough to protect a GRP water tank and its pipework from weather, vandalism or accidental damage. Handily, GRP tanks can be covered with self-supporting and centrally supported covers and housing. Features we can provide for these housing include single or double doors, lockable handles, fire retardant resin and a variety of external colours.
For more info contact GRP Tank UAE or call us at +971 4 252 2966
There are many other reasons why GRP products are worth your consideration. Here’s five other reasons why you should be interested in our range of GRP products:
Designed to meet stringent regulations
Our GRP one-piece water tanks are specifically designed to meet stringent water regulations, guaranteeing that they are fully equipped to fulfil their purpose. This mark of quality has led GRP water tanks to be used by a wide variety of clients including county and district councils, consulting engineers and architects.
Suitable for various applications
Another reason we recommend GRP tanks is due to their flexibility. We can manufacture GRP tanks made from three different resins, depending on our clients’ needs. While our standard water tanks are suitable for constant water temperatures of up to 40 degrees Celsius, our feed and expansion tanks can handle water up to 70 degrees while our chemical tanks can handle water up to boiling point.
True to their name, specialist chemical tanks are most adept at handling chemicals at varying concentrations. We can also provide rainwater and open tanks.
Available in numerous sizes and shapes
GRP tanks are useful for not being in a standardised size. Our range of water tanks varies from as small as 45 litres right up to 97,500 Litres. No matter how much storage you need, there will be the right GRP tank for you. It is also possible to cut GRP tanks into irregular shapes such as L shapes, making them easy to fit into unusual spaces.
Can be pre-insulated
It is often vital to protect water tanks from heat and cold damage. This is because excessive temperature changes can lead to ruinous bacterial growth in the tank. GRP tanks can easily be pre-insulated against damage using polyurethane insulation foam on the lid and sides of the tank. The thickness of the foam can be varied depending on the amount of protection required.
Can be provided with covering and housing
Sometimes insulation may not be enough to protect a GRP water tank and its pipework from weather, vandalism or accidental damage. Handily, GRP tanks can be covered with self-supporting and centrally supported covers and housing. Features we can provide for these housing include single or double doors, lockable handles, fire retardant resin and a variety of external colours.
For more info contact GRP Tank UAE or call us at +971 4 252 2966
- Published on
GRP storage tanks are not limited to just holding fresh water. Of course, water tanks are useful for a variety of purposes linked to water, such as protecting a portable water supply and rainwater harvesting in the garden. However, such tanks can serve wider specialist functions which aren’t strictly connected to fresh water. Here are a few other forms of GRP storage tank:
Feed and expansion (F&E)
Glass-reinforced plastic (GRP) F&E tanks are used to supply central heating circuits with water and accommodate the expansion of the water when it is heated by the boiler. It is often placed in the loft of a house and is informally known as the header tank.
Due to the temperatures they need to be able to hold, F&E tanks are often manufactured to be heat resistant. F&E tanks are suitable for temperatures up to 120°C making them a resilient alternative to metal tanks. The resin used in the manufacturing process also gives F&E tanks excellent chemical resistance, making them corrosion resistant and an ideal choice for storing chemicals such as glycol in lower concentrations. Coupled with their availability in a variety of different sizes, all this makes the F&E tank a versatile type of tank.
Chemical storage tanks
Made from different resins to standard water tanks, chemical storage tanks are specifically designed to be the first line of control in holding dangerous chemicals, sludge and slurry - suitable for carrying many types of chemicals at varying concentrations. Their high tolerance also means that they can be suitable for storing water up to a constant boiling point.
When picking a chemical storage tank it’s often important to make several considerations, such as how expensive the tank is and how the relevant chemical will affect the surrounding environment. As they are often modified to fit specific requirements, chemical storage tanks can offer a practical solution.
Plant housing
In addition to water and chemical storage, storage tanks can be used as an excellent method of plant housing in remote locations where a pump room is needed alongside pump housing. It is possible to have a water tank and pump housing combined in one housing tank, with a small plant room section placed on the end of the tank.
Again, these tanks can be tailor-made with air gaps, backing boards, lockable doors and insulation foam when necessary, making them an excellent option for storing your plants safely and securely. What’s more, this form of plant housing can come in one complete lightweight unit which makes it easy to transport and lift once you are done.
For more info contact grp tank supplier in uae or call us at +971 4 252 2966
Feed and expansion (F&E)
Glass-reinforced plastic (GRP) F&E tanks are used to supply central heating circuits with water and accommodate the expansion of the water when it is heated by the boiler. It is often placed in the loft of a house and is informally known as the header tank.
Due to the temperatures they need to be able to hold, F&E tanks are often manufactured to be heat resistant. F&E tanks are suitable for temperatures up to 120°C making them a resilient alternative to metal tanks. The resin used in the manufacturing process also gives F&E tanks excellent chemical resistance, making them corrosion resistant and an ideal choice for storing chemicals such as glycol in lower concentrations. Coupled with their availability in a variety of different sizes, all this makes the F&E tank a versatile type of tank.
Chemical storage tanks
Made from different resins to standard water tanks, chemical storage tanks are specifically designed to be the first line of control in holding dangerous chemicals, sludge and slurry - suitable for carrying many types of chemicals at varying concentrations. Their high tolerance also means that they can be suitable for storing water up to a constant boiling point.
When picking a chemical storage tank it’s often important to make several considerations, such as how expensive the tank is and how the relevant chemical will affect the surrounding environment. As they are often modified to fit specific requirements, chemical storage tanks can offer a practical solution.
Plant housing
In addition to water and chemical storage, storage tanks can be used as an excellent method of plant housing in remote locations where a pump room is needed alongside pump housing. It is possible to have a water tank and pump housing combined in one housing tank, with a small plant room section placed on the end of the tank.
Again, these tanks can be tailor-made with air gaps, backing boards, lockable doors and insulation foam when necessary, making them an excellent option for storing your plants safely and securely. What’s more, this form of plant housing can come in one complete lightweight unit which makes it easy to transport and lift once you are done.
For more info contact grp tank supplier in uae or call us at +971 4 252 2966
- Published on
Has there ever been a time in history when we haven’t needed to store water? It is so essential to life that economists describe it as the most valuable commodity in the world. What is one of the most effective ways to store your water? By using Dxb Solutions cold water storage tanks. We offer a wide range of water tanks to suit you and we design and manufacture each tank to extremely high standards. What makes these high-quality products and what types of water storage tanks can we offer you?
High-Quality Water Storage Tanks
With over years of experience, we design and install every GRP water tank, so you can be assured that they are high-quality products. How do these water storage tanks perform? They are resistant to corrosion and bacteria, which is good aesthetically and more importantly, this protects the quality of the water inside. Although we use tough, durable materials, they are lightweight and easy to handle and manoeuvre. What if you need to drill or cut these water storage tanks? No problem – you can easily do this with standard tools. As a premier manufacturer, we can offer you the widest range of water tanks anywhere in UAE. What styles and types of water storage tanks can you choose from?
One Piece Storage Tanks
Do you require one piece water tanks? We produce various types to suit your requirements. Take for example, the Water Tank. This huge one piece tank has a capacity of 21,475 gallons or 97,500 litres. If you are in the construction industry and you build hospitals, schools, fire stations, and other buildings, this could be perfect for you. These are viable alternatives to sectional tanks where there are no restrictive access problems. What are some of the advantages of this water tank? As it is in one piece, there are no joints or sealants, and the installation costs are low. They require little maintenance once they are in place and they are one of our most cost-effective water storage tank options. What if your access is limited?
Semi-Sectional Water Storage Tanks
Many buildings and sites have limited access, so you might not be able to accommodate one piece tanks. What’s the alternative? Our range of semi-sectional water tanks. We design these specifically for easy access and installation. These have a lower fluid capacity, but can still hold up to 10,000 litres of water. You can choose from standard units or pre-insulated tanks, depending on your requirements. When you purchase one of our semi-sectional water tanks, we will supply you with fixtures and fittings, including washers, bolts, nuts, and sealer. It’s important that any semi-sectional tank is installed correctly to prevent any leakages. What if you require a custom-made water storage tank?
Water Storage Tanks
We can design and manufacture a water storage tank to your exact specifications. Our design service means that we can meet all your water storage tank requirements, even if you can’t locate a suitable product on our website. Feel free to contact us for GRP tanks or call us at +971 4 252 2966
High-Quality Water Storage Tanks
With over years of experience, we design and install every GRP water tank, so you can be assured that they are high-quality products. How do these water storage tanks perform? They are resistant to corrosion and bacteria, which is good aesthetically and more importantly, this protects the quality of the water inside. Although we use tough, durable materials, they are lightweight and easy to handle and manoeuvre. What if you need to drill or cut these water storage tanks? No problem – you can easily do this with standard tools. As a premier manufacturer, we can offer you the widest range of water tanks anywhere in UAE. What styles and types of water storage tanks can you choose from?
One Piece Storage Tanks
Do you require one piece water tanks? We produce various types to suit your requirements. Take for example, the Water Tank. This huge one piece tank has a capacity of 21,475 gallons or 97,500 litres. If you are in the construction industry and you build hospitals, schools, fire stations, and other buildings, this could be perfect for you. These are viable alternatives to sectional tanks where there are no restrictive access problems. What are some of the advantages of this water tank? As it is in one piece, there are no joints or sealants, and the installation costs are low. They require little maintenance once they are in place and they are one of our most cost-effective water storage tank options. What if your access is limited?
Semi-Sectional Water Storage Tanks
Many buildings and sites have limited access, so you might not be able to accommodate one piece tanks. What’s the alternative? Our range of semi-sectional water tanks. We design these specifically for easy access and installation. These have a lower fluid capacity, but can still hold up to 10,000 litres of water. You can choose from standard units or pre-insulated tanks, depending on your requirements. When you purchase one of our semi-sectional water tanks, we will supply you with fixtures and fittings, including washers, bolts, nuts, and sealer. It’s important that any semi-sectional tank is installed correctly to prevent any leakages. What if you require a custom-made water storage tank?
Water Storage Tanks
We can design and manufacture a water storage tank to your exact specifications. Our design service means that we can meet all your water storage tank requirements, even if you can’t locate a suitable product on our website. Feel free to contact us for GRP tanks or call us at +971 4 252 2966
- Published on
Purchasing a GRP water tank can represent a very real investment and a good amount of thought should take place beforehand in order to make certain that you select the proper make and model. Let's look at the below areas to address so that the most appropriate decisions can be made.
1. The Dimensions of the Tank
In this sense, we are referring to the amount of water that the tank can hold. Depending upon your requirements, we can provide a dimensional range between 1000 litres and 500,000 litres.
2. Weight Issues
The weight of a tank needs to be considered; particularly if it will need to comply with existing structural requirements. A GRP water tank (glass fibre-reinforced plastic) boasts a lightweight and sturdy nature that is ideal for such situations.
3. Water Tank Fittings
Water tank fittings and valves are other important accessories to keep in mind, as they will directly affect the efficiency and dependability of the unit. They should be made of modern materials and be resistant to corrosion over time.
4. Protection from the Elements
A GRP water tank is normally equipped with some form of cover. Inspection hatches, handrails and even walkways can be other choices. Always check to make certain that the cover will meet the exact specifications of the tank itself.
5. Unique Solutions?
Many firms only offer a very specific range of tanks. While this may be sufficient for most applications, you can also encounter times when you will require a bespoke tank to be manufactured to exacting dimensions. Does the company offer this service and will they perform an on-site survey in advance?
6. Screened Venting
Some tanks will require a surface aperture in order to safely vent excess fumes or heat. This could apply to certain types of water and chemical storage tanks. There may even be times when local regulations dictate that such a vent is required by law. So, be sure to discover whether or not this is relevant to your situation.
7. Sectional Tanks
Sectional water tanks are often found within schools, hotels and hospitals. they are used when there is only limited access to an area or if replacing an existing tank will require major structural alterations. These can be installed by the manufacturer or with the expertise of accredited on-site engineers.
8. Internal or External Flanges?
The location of water tank flanges will often depend upon discrete installation requirements. For instance, internal flanges will be used when the tank rests upon a flat foundation. External flanges are needed when the tank is placed upon steel girders or dwarf walls.
9. Remote Tanks
Sometimes referred to as plant tanks, these variants are frequently utilised in remote locations (such as on a construction site) or when a separate pump housing is required alongside a water supply. These are excellent ways to save space and to protect all internal mechanisms.
10. Pricing
Of course, it would be remiss to not mention the price of the unit. This concept is just as relevant for chemical storage tanks as it is regarding common water tanks. We are pleased to provide a number of different options and thanks to our in-house fabrication methods, clients can expect to enjoy highly competitive rates.
1. The Dimensions of the Tank
In this sense, we are referring to the amount of water that the tank can hold. Depending upon your requirements, we can provide a dimensional range between 1000 litres and 500,000 litres.
2. Weight Issues
The weight of a tank needs to be considered; particularly if it will need to comply with existing structural requirements. A GRP water tank (glass fibre-reinforced plastic) boasts a lightweight and sturdy nature that is ideal for such situations.
3. Water Tank Fittings
Water tank fittings and valves are other important accessories to keep in mind, as they will directly affect the efficiency and dependability of the unit. They should be made of modern materials and be resistant to corrosion over time.
4. Protection from the Elements
A GRP water tank is normally equipped with some form of cover. Inspection hatches, handrails and even walkways can be other choices. Always check to make certain that the cover will meet the exact specifications of the tank itself.
5. Unique Solutions?
Many firms only offer a very specific range of tanks. While this may be sufficient for most applications, you can also encounter times when you will require a bespoke tank to be manufactured to exacting dimensions. Does the company offer this service and will they perform an on-site survey in advance?
6. Screened Venting
Some tanks will require a surface aperture in order to safely vent excess fumes or heat. This could apply to certain types of water and chemical storage tanks. There may even be times when local regulations dictate that such a vent is required by law. So, be sure to discover whether or not this is relevant to your situation.
7. Sectional Tanks
Sectional water tanks are often found within schools, hotels and hospitals. they are used when there is only limited access to an area or if replacing an existing tank will require major structural alterations. These can be installed by the manufacturer or with the expertise of accredited on-site engineers.
8. Internal or External Flanges?
The location of water tank flanges will often depend upon discrete installation requirements. For instance, internal flanges will be used when the tank rests upon a flat foundation. External flanges are needed when the tank is placed upon steel girders or dwarf walls.
9. Remote Tanks
Sometimes referred to as plant tanks, these variants are frequently utilised in remote locations (such as on a construction site) or when a separate pump housing is required alongside a water supply. These are excellent ways to save space and to protect all internal mechanisms.
10. Pricing
Of course, it would be remiss to not mention the price of the unit. This concept is just as relevant for chemical storage tanks as it is regarding common water tanks. We are pleased to provide a number of different options and thanks to our in-house fabrication methods, clients can expect to enjoy highly competitive rates.
- Published on
Glass Reinforced Plastic tanks (otherwise known as GRP tanks) offer flexible solutions that are designed to meet various domestic and industrial requirements. Let us examine a handful of the most common applications in greater detail.
Fire Sprinkler Tanks
Due to the fact that fire suppression systems must be present in many commercial properties, our fire sprinkler tanks can accommodate these discriminating needs. Different sizes (such as large capacity models) are available while we can also manufacture a system to exacting dimensions.
Dipping Tanks
There are many times when a certain object needs to be coated with a specific material. One example here can be a facility which produces metallic parts protected by a latex skin. Our dipping tanks are equipped with an open top for easy access and once again, a number of different sizes are available.
Open Top Tanks
The two aforementioned products are examples of our open top tanks. While their dimensions are quite flexible, it should also be mentioned that a reinforced upper lip prevents the structure from bowing or deforming when water is present.
Chemical Tanks
Thanks to a sturdy construction and the use of proprietary materials, we are pleased to be able to offer a number of chemical tanks to be used within various industries. Our storage units can also withstand constant water temperatures of up to 100ºC. Please contact us to discuss your discrete requirements further.
Feed & Expansion Tanks
All of our feed & expansion tanks are constructed from a Grade B resin compound. This provides a lightweight, malleable and yet durable structure. These tanks can support mean temperatures of up to 70ºC. Low-concentration liquid compounds such as glycol may also be stored within these tanks.
Standard Tanks
Standard tanks are suitable for a wide variety of needs. Fashioned from our normal blend of resin, they can withstand temperatures as high as 40ºC. Please note that these are not intended to be used to store chemical solutions.
Rainwater Storage Tanks
One of our specialities is the ability to supply quality rainwater storage tanks for both domestic and commercial uses. Both above- and below-ground models are available. Please note that every tank needs to be placed upon a flat and firm foundation. A handful of benefits that are associated with these tanks can include:
Water and Chemical tanks
This is a rather broad category and therefore, the exact specifications of our tanks will depend upon the unique qualities of the liquids themselves. Our water and chemical tanks can be manufactured from three different types of resin.
These are some of the standard uses for the variety of GRP tanks that we are proud to offer. They are constructed from quality materials and built to last. To learn more about our capabilities, please do not hesitate to speak with one of our representatives at your convenience.
For more info contact GRP Tank UAE or call us at +971 4 252 2966
Fire Sprinkler Tanks
Due to the fact that fire suppression systems must be present in many commercial properties, our fire sprinkler tanks can accommodate these discriminating needs. Different sizes (such as large capacity models) are available while we can also manufacture a system to exacting dimensions.
Dipping Tanks
There are many times when a certain object needs to be coated with a specific material. One example here can be a facility which produces metallic parts protected by a latex skin. Our dipping tanks are equipped with an open top for easy access and once again, a number of different sizes are available.
Open Top Tanks
The two aforementioned products are examples of our open top tanks. While their dimensions are quite flexible, it should also be mentioned that a reinforced upper lip prevents the structure from bowing or deforming when water is present.
Chemical Tanks
Thanks to a sturdy construction and the use of proprietary materials, we are pleased to be able to offer a number of chemical tanks to be used within various industries. Our storage units can also withstand constant water temperatures of up to 100ºC. Please contact us to discuss your discrete requirements further.
Feed & Expansion Tanks
All of our feed & expansion tanks are constructed from a Grade B resin compound. This provides a lightweight, malleable and yet durable structure. These tanks can support mean temperatures of up to 70ºC. Low-concentration liquid compounds such as glycol may also be stored within these tanks.
Standard Tanks
Standard tanks are suitable for a wide variety of needs. Fashioned from our normal blend of resin, they can withstand temperatures as high as 40ºC. Please note that these are not intended to be used to store chemical solutions.
Rainwater Storage Tanks
One of our specialities is the ability to supply quality rainwater storage tanks for both domestic and commercial uses. Both above- and below-ground models are available. Please note that every tank needs to be placed upon a flat and firm foundation. A handful of benefits that are associated with these tanks can include:
- An internal lining that will discourage many forms of bacterial growth.
- Insulated materials that are resistant to the ultraviolet rays of the sun.
- A removable lid that can be securely fastened with bolts.
- We supply a variety of capacities to suit numerous needs.
- Multiple colours are available upon request.
Water and Chemical tanks
This is a rather broad category and therefore, the exact specifications of our tanks will depend upon the unique qualities of the liquids themselves. Our water and chemical tanks can be manufactured from three different types of resin.
These are some of the standard uses for the variety of GRP tanks that we are proud to offer. They are constructed from quality materials and built to last. To learn more about our capabilities, please do not hesitate to speak with one of our representatives at your convenience.
For more info contact GRP Tank UAE or call us at +971 4 252 2966
