Cleaning the GRP tank can be a challenging task, but it is worth the effort. In this article, I want to explain to you how to clean grp water tank. What is the point of having a storage tank if not to have clean water? I mean, if you are going to neglect and keep it unclean, it is more or less like leaving the water in open storage where all sorts of germs and particles can just dive in.
Leaving it unclean for a long time will only attract the growth of algae and other unpleasant fungi. What’s more? If the water is left to stay for long, it gets a bad odor and even tastes unpleasant. The algae could also produce silt and bacteria which could be toxic.
It is up to you to ensure that the tank is cleaned at least once or twice annually.
Dewater the tank
You have to drain all the water first by opening a tap outlet to let the water out. You can also use hosepipes so you can direct the water to a safe area without causing erosion. Use a sanction machine or dry vacuum cleaner to dry the tank completely.
Mix the cleaning products
Make a cleaning mixture by adding some mild and laundry detergent in hot water. This is helpful in sediments removal and getting rid of the residues from the tank.
Cleaning the walls
Start by scrubbing the walls of the tank thoroughly using the cleaning mixture and a bristle brush. Do it around all the walls applying more pressure as you move your hands horizontally and getting rid of all the sticky dirt.
Clean the inside of the tank
Scrub the inside of the tanks thoroughly to get rid of the sediments and scum. You, however, must ensure that you have the best resin for best results and not only that, make sure that you have prepared the tank well for cleaning. Fill your power washer with the cleaning mixture (the one you made from water and detergent). If you realize that the solution is getting harder with time, add acetone to dissolve
Hold the washer in the best position and distance that will work for you in removing all the dirt and sediments. Repeat the procedure until you are satisfied with the results. Note that you should be wearing protective gear such as gloves and glasses throughout the process.
Rinsing dirt from the tank
Now that you have already scrubbed off the sediments from the floor and wall of the tank, it is time to rinse the tank with purely clean water. You can use hose and pipes for this. The other option is filling the tank with hot water, wait for it to stand for some time before draining it and repeat the process until all the sediment and detergent is swept off.
Drying the tank
It is time to get rid of any water residues, and the best way to go about it is using a vacuum to dry it off until there are no traces of dirty water.
There, you have a clean water tank, and you can now refill it with fresh water.
For more info contact GRP Panel Water Tank UAE or call us at +971 4 2522966
Stainless steel water tank Cleaning can be a daunting job, but it is actually important to ensure that water inside the tank stays clean always and it is bacteria-free. It is important to clean the water tank at least once every year.
This is because water tanks normally acquire silt, algae and bacteria over time and this can be harmful. As you clean your stainless steel water tank, ensure that you follow proper procedures for draining the tank, cleaning the interior part and then disinfecting your tank.
Start by opening the outlet tap to empty all water from it. Connect the hose and pipes to the open tap to direct water into a location where it wont cause any erosion.
Scoop all water in the bottom of the stainless steel water tank using a bucket. This is the water that normally remains after draining it. Ensure that you remove all the water remaining by either using a wet or dry vacuum to drain or suck water remains.
Opening the outlet tap to empty all water
Make the cleaning mixture to help in removing a lot of sediment and residue from the tank. The cleaning mixture makes work easier. To make the mixture simply mix the hot water with the laundry detergent powder and mild detergents.
Scrub the inside walls of the tank using a bristle brush with the cleaning solution. Move the arm horizontally all sides as you apply a lot of pressure on the brush. Do this around the entire walls of the tank. Scrub off any grease or residue. Do this until you remove as much sludge and slime as possible.
Clean the inside of the tank
Use the power washer to properly clean the inside of the tank. Scrub the inside on the tank to again remove the tough sediment and residue. Follow the following steps when cleaning using the power washer;
Preparing the tank all the time is actually expensive and time consuming. Therefore it is important to ensure that you get the best resin compound from the market so that you wont be preparing your tank all the time.
Use a garden sprayer to spray the leaking part on the inside. Take the resin compound and ensure that it is well packed. Resin compound is gluey and combustible. It works perfectly for stainless steel materials.
Mix the compound with a Ketone solution. However, in most cases, the two are purchased mixed already. After some time, the solution may start hardening. This is solved by adding a small amount of acetone.
Fill the power washer with the cleaning solution
Hold it to find the best distance which works best to remove dirt, debris and sediment
Do this continuous until you are satisfied that everything that makes the tank dirt has been completely removed
Ensure that you always wear safety goggles when cleaning using the pressure washers. This is because they are very powerful
You can also use a wooden spatula to rub the residue from the bottom of the tank
Remove sediments and dirt
For those sediments and dirt that have trouble in getting them off, you can use baking soda to remove it. Sprinkle the inside walls of the tank with the baking soda and ensure you scrub them with brush.
Scrub all the corners and joints of your stainless steel tank. As you scrub ensure that you pay a lot of attention to joints and corners because these are places where residue stuck mostly. It may be difficult to clean in this places but spend extra time to clean them.
Remove the remaining liquid
The moment you are satisfied that you have scrubbed well and removed most or all of the residue from the inside of your steel tank. Rinse the tank thoroughly. Use the hose and pipes in spraying down the walls to rinse it.
You can also rinse the tank by filling hot water and allowing the tank to stand for some hours. You can then drain it. Ensure that you collect and safely dispose all the drained water. Do the process again until water is completely free from detergent and sediment.
Remove the remaining liquid and any residue using the vacuum. Vacuum the tank by attaching the wet or dry vacuum to vacuum it out. Ensure that you get the hose into cracks corners and crevices of your tank to remove all the residue.
Flush the hoses and pipes of the tank by pouring some cleaning solution into them. Use the water pump to pump the solution through the tank. Remove any dirt and sediment inside. Repeat the same process again using hot water.
Chlorine bleach to the tank
After scrubbing the inside walls and bottom of your tank, you can then perform the disinfecting process. Start by filling your tank almost three quarters with clean water. Add some chlorine bleach to the tank using a ratio of 50 ppm to the amount of water. Use the following guidelines
250 gallon tank-4 cups of bleach
500 gallon tank-1/2 gallon of bleach
750 gallon tank-3/4 gallon of bleach
1000 gallon tank-1 gallon of bleach
After adding the right amount of bleach , fill the rest of the tank with another clean water. This will enable the bleach to mix well with the rest of water in the tank. Leave the solution inside the tank for about 24 hours.
Ensure that nobody comes near the solution because it can be harmful. Use chlorine strips in checking the amount of chlorine periodically and drain the tank completely.
For more details please visit GRP Panel Water Tank UAE or call us at +971 4 252 2966
A leaking water tank can indicate of several problems ranges from failure in installation to not strong foundation on the base of the GRP water tank where it stands. On the other hand, water pooling from your tank will not always indicate a leak, sometimes it can possibly be a result of condensation.
In order to get better grp water tank maintenance, we look for some causes of tank leaking. One of the most common causes of tank leaking is the age. It is a big consideration to know if how old is your tank now. No matter how good in quality your GRP water tank is, but you have been using it for quite long, then maybe some part of it has come to its failing stage.
Obviously, GRP Panel tank leakage prevent you from continuing on using it. However, to help you avoid the cost of buying a new tank, it would be better if you find where the leaking started to further assess what to do next.
In most cases, leaking from your water tank will come from the inside. Since GRP panels are already waterproofed, you may find another observation whether a crack is present of the leak comes from panel joints.
If the cause of the leak is a crack, using the proper sealant is the appropriate thing to do. However, if you can’t find the source of the leak or if you tried to seal it but did not worked, then don't panic as there's still a solution for that.
Fixing your GRP water tank leak through our team of experts
Contact our team of experts
To avoid improperly fixed GRP tank leakage prevent fixing it by yourself. Your tank should be assessed first by our team of experts. Commonly, based from our protocol, if a customer has reported a leaking GRP water tank and they require our assistance, we won't hesitate to do a visit to the site. Thus, we primarily recommend you to contact us if leaking of your GRP water tank will exist.
Identifying the problem
Our team of experts, after checking the leaking GRP water tank, they can clearly see the issue and what your tank needs.
In some cases, it is quite easy to determine by our team if the signs of leaks are shown on the tanks divisions wall. If this is the case, there's a bigger possibility that the foundations and the base of the tank are not correctly done with respect to the tank capacity.
Even if how rigid and good quality the tank is but if the base foundation is not technically considered then tank leakage will really be expected inevitably as time will pass by.
On the other hand, there are some other factors to look out for GRP panel tank leak causes:
●Fully relined, being refilled
●Get coat's black mould and blisters
●Base leak or any part of the GRP tank construction
Do it yourselfDo it yourself the right wayUnless you have enough valid reason not to use our team of experts to fix your leaking GRP water tank, you can proceed your own research to do the fixing of your tank the right way.
Why is a thorough research is needed first before fixing your tank by yourself? It is mainly to avoid further issues that can trigger a bigger damage from a supposedly small leaking.
Having enough knowledge on what to do with the fixing will mean a big thing towards the success of getting your tank fixed. Otherwise, you will end up contacting our team of experts to do it for you.
Empty your tank completely
Once your tank is completely empty, you can now proceed locating the leak. It might be confusing for some as they prefer to have the tank filled to locate the leak. But emptying your tank means you already have the initial observation as to which part of the tank has leaks. Emptying it will simply mean checking the leaking part on a clearer view.
Repair it using conventional techniques
This is applicable if the GRP tank leakage is only caused by a small crack. This technique is in relation to general repair of crack in a fiberglass material.
a.At each end of the crack, you must drill a tiny hole. Doing this will stop the crack from expanding further.
b.Identify the crack size. With hairline cracks, Hand held or electric rotary blade is recommended to use to widen the crack just a bit. By doing this will allow the crack to possibly be filled with epoxy resin.
c.Using a dry rag, wipe the crack to make sure it's clean and dry. If the crack is not dry and clean enough, the epoxy won't adhere well.
d.With fair amount of fiberglass epoxy resin, fill the crack using a plastic applicator. You have to make sure that the crack is completely filled.
e.Within 24 hours, let the epoxy dry. Once the fixed area is dry, smooth the surface with sandpaper.
f.For additional appearance consideration, you may want to polish a colored gel-coat enamel over the repaired area to make the repair unnoticeable.
For whatever option you have undertaken on GRP tank leak repair methods, we are confident to have the best solution for you for fixing the problem either by using our team of experts or giving to you enough instruction to do it yourself.
With the number of years our technical team has been specializing, manufacturing installing and refurbishing/replacing sectional water storage tanks will be done smoothly having minimal disruption to water supply. Our only aim is make you satisfied and happy with the services that we are offering.
Part of qualifying more on fixing your tank using option B, by doing it yourself, is knowing more on your GRP water tank specifications and your purpose of tank usage.
What is all about tank deformations?
In some cases, while acquiring a new GRP water tank from us, in terms to leakage, you cannot expect leaks after being filled with water. What will occur might be deformation but not more than 10 mm as it could just be a reaction once the water is inside the tank.
This deformation is no more than 1.0% of the bottom center height of the tank. Thus, there’s nothing to worry once you observe it happened. However, if deformation exceeded on this limit, then something might be wrong in the pressure of water that’s coming to your tank or during the installation.
You might be fixing it by yourself or letting our team of experts fix your leaking water tank, with assurance, our workmanship and methods of application as advised above on how to fix a leaking GRP water tank is highly recommended for you.
For more info contact GRP Panel Water Tank UAE or call us at +971 4 252 2966
Overhead Water Tanks is one of the most essential and important product for every structure that’s being built today. Mainly used for storage purpose, these Water Tanks have a capacity to store water to about 1000 Litres to 500,000 Liters. Water is used for many purposes and therefore choosing the right Water Tank for all these applications becomes very critical. Based on the applications and usage the right capacity of the tank should be determined.
There are certain factors to keep in mind while selecting an Overhead Water Tank:
For more info contact GRP Tank UAE or call us at +971 4 252 2966.
GRP or Glass Reinforced Plastic is also commonly known as fibre glass. This material has a lot of advantages over other traditional materials that are used in the manufacture of water storage tanks. For the installation of a modern cold water storage tank there is no better choice than GRP. Here we explore why this is the superior material to choose.
Resistant to Corrosion
Steel has commonly been used as a material for water storage but the big downside to this material is that it will corrode and requires galvanising to prevent this. GRP, on the other hand, is corrosion resistant and can even withstand exposure to chemicals, wastewater and sewage if required.
High Strength Factor
Despite its light weight, GRP is also extremely strong. GRP outperforms traditional materials including aluminium in strength tests, making this material perfect for longevity.
GRP one piece water storage tank will have a lifespan of 25 years, which is far greater than alternative materials. In this time the GRP will not need to be treated in order to maintain it so you won’t need to worry about coating or repainting it during its lifespan.
GRP is a very light material which has a range of benefits. Installation on roofs will require less reinforcement because of the lighter weight and heavy lifting equipment will not be required for installation. This can help to significantly lower the installation costs and can make it more practical to install a cold water storage tank in a wider range of properties without the need for crane access.
When compared to other materials used in the manufacture of water storage tanks, GRP is the clear choice to make. This lightweight, corrosion resistant and tough material out-performs other traditional materials in every test and will last for longer too. If you are considering installing a sectional water tank on your home then you should look no further than GRP tanks. To find out more or to request a quote, contact us today.
For more info contact GRP tank suppliers in dubai or call us at +971 4 252 2966
Rainwater is an excellent free resource with many great applications. We use it to keep our gardens green and healthy, to lead a sustainable lifestyle, to save money and to reduce or eliminate our reliance on public water supplies.
Whatever specific needs that you are using your rainwater tank for, it is critical that your rainwater is as clean and pure as it can possibly be. This becomes even more important when you live somewhere that is exposed to pollutants, such as a city.
The most important first step to water that is always clean and free of impurities is to begin with a high-quality Poly Water Tank and associated accessories, such as water tank pumps and filters. You should also have your entire rainwater system installed by a licensed plumber according to the manufacturer's instructions.
Next, spend the time to make sure that your down pipes and gutters are kept clean and free of leaves and other forms of debris. Also be sure to regularly clean and replace your inlet mesh.
The installation of a filter and diverter between your house and your pump is the next step, which will ensure that you minimize any grit or sand that can get into your washing machine or toilet as part of the collected rainwater.
You should check on your inlet strainer weekly, and your filter cartridge and pump every three months. You will need to change your filter cartridge every six to nine months and rinse your strainers to keep them clean from leaf litter and dust. If you bought a cover for your water tank pump, it will aid you in keeping the pump clean and operating effectively, and help the the noise reduction of your pump's motor.
If you use an underground tank and a back-up connection to the public water system, then your plumber should inspect the back-flow prevention valves once each year.
When rainfall is scarce, there can often be a build up of sludge that will lower the quality of the rainwater held in your tank. Even when rain is not scarce, it is still possible to have sludge build up from not flushing your tank with rainwater. If the rainwater in your tank is being regularly refreshed from new rainfall, which contains fresh oxygen, then this will only apply to the area above the outlet.
Even with strainers and filters, microscopic organic particles will enter your rainwater tank, and then proceed to accumulate at your tank's bottom. This accumulation will become a layer of sludge because the bottom of your rainwater tank is an anaerobic zone, without oxygenation. Too much of this sludge will affect the quality of the rainwater in your tank, and will need to be removed only if the tank water is used for human consumption.
Ideally you want to check the bottom of your tank once every two to three years as part of a routine maintenance plan.
Regular maintenance programs for pumps and rainwater tanks save owners money and time, and can usually be arranged with the plumber who installed the system. If not, there are always plumbers who are willing to take on a maintenance and repair contract for a rainwater tank and pump system.
Your small initial investment into a rainwater tank will offer you many years of healthy and free rainwater. All it takes is a small amount of looking after on your part.
For More info contact GRP tank suppliers in dubai or call us at +9714 252 2966
Synthetic or FRP storage tanks have evolved the warehousing of materials across the world. FRP storage tank manufacturers recommend their clients using storage tank for food, water, liquids, chemicals, and other materials. In this post, they will talk about the failures and preventive measures for plastic tank.
At manufacturing unit, you can find distinct types of plastic tanks in sorts of sizes and capacities. You can store from 100 liters of water to thousands of liters of other materials in the FRP storage tank. Manufacturers have made the life of their consumers easy by bringing this range of products. These tanks can be categorized into –
Double wall storage tanks, brine tanks, and underground plastic tanks are some widely accepted storage options used by industries for storing chemicals.
Other than these tanks, there are vertical tanks and horizontal tanks available on request. Vertical tanks are used for storing stationary and horizontal designs are for transportation purposes.
Tanks usually crack when you misuse them. You need to make the material choice first before selecting storage tank. For instance, if you want to store water, you can get any plastic tank, but if you want to store chemicals, you need to visit GRP storage tank manufacturers and get the suitable storage tank that meet your requirements and budget. For more queries, you can mail to the experts and wait for their response.
When you’re looking to decide on what kind of water tank is best for you, it is worth considering a GRP water tank. They offer superior quality when looking for industrial water storage tanks. The acronym stands for Glass-Reinforced Plastic, which is a material formed by reinforcing three-dimensionally meshed Duroplastic with glass fibres. The result is a substance that has the combined properties of steel and plastic, as it is perfect for harsh environments, yet ensures a high level of safety. They are square or rectangular and there are many benefits to picking this type of water tank.
Protects Against Corrosion
Usually, corrosion may occur in water tanks from a build-up of bacteria. However, in GRP water tanks they are fitted with either 25mm, 50mm, 75mm or 100mm insulation. The benefit of having this insulation fitted is that the contents are protected from either extreme of heat or cold. This reduces any excessive temperature fluctuations which may otherwise occur, and would normally increase the risk of bacteria. Additionally, less bacteria also means that the water tanks are considered odor-proof
These water tanks are supplied as one piece, meaning from their shipment to their delivery, they are one whole product rather than into sections which you would need to connect together. The result is a water tank that is extremely durable, with no weaker parts, seals, or joins. Due to its durability it is able to last longer, making it a worthwhile investment.
The materials used for this type of water tank are CFC and HCFC free. This means that it is possible to recycle them in the future by melting them down and reforming. This ensures that there is a life beyond the use of these water tank, and you can know that it is not harming the environment. Especially considering the environmental benefits of using a water tank, we know that this is an important point for our customers.
Many are surprised about how lightweight the GRP tanks supplied are, meaning that they are easy to handle. Despite this, their material makes them strong and durable, ensuring that they are always able to remain stable and secure.
Our GRP water tanks are able to accommodate tank connections and fittings with our standard positioned pre-formed cut-outs. We are also able to make changes depending on your preferences to enable it to meet the required function. Special sizes might include an L-shaped tank, or a tapered tank or cistern, as well as any other particular specification. They are able to hold various sizes from 10 - 11,250 Gallons or 45 - 90,000 Litres.
For more info contact GRP tank Suppliers in Dubai or call us at +971 4 252 2966
What is a GRP Water Tank?
A Glass Reinforced Plastic Water Tank, or GRP Water Tank, is a water storage unit made from glass reinforced plastic, the material also known as fibreglass. Glass Reinforced Plastic is produced through layering and combining glass fibres; the individual fibres are woven together to produce a flexible material that is placed into a mould, where polyester resin is added to the material, strengthening the fibreglass fabric to its final, rigid state. This process produces extremely strong and durable, yet light GRP Water Tanks, which can endure harsh environments such as extreme cold, heat and rain without degrading or falling into disrepair. It is this durability and resistance to the elements that make GRP Tanks a modern replacement to older steel or aluminium water tanks which were once the industry standard.
Resistance to the elements
One of the most popular reasons behind companies upgrading to GRP Tanks are their durability and resistance to adverse temperatures and weather. Over time, many metals, including steel and aluminium, can corrode due to persistent attacks from the cold, the heat, rain or snow, all common instances of adverse weather we experience in the UK. GRP Tanks provide a means to store water, or other substances depending on the tank purchased, with minimal maintenance. GRP Water Tanks do not require regular coatings of protective paints or material repairs due to its resistance to corrosion.
GRP Water Tanks provide structural integrity across their entire body, due to the GRP Tanks being manufactured as one-piece products. This means there aren’t any welds, seals or rivets that can degrade or weaken over time. Moreover, GRP Water Tanks offer excellent load-bearing qualities without weighing as much as metallic alternatives, meaning you can store the GRP Water Tanks without having to spend as much on extra structural supports to bear the load of the tank and its contents. What’s more, due to GRP Water Tanks having inherent UV resistance, the structural integrity is not lost over time from sun exposure.
Given that GRP Water Tanks are moulded products, they can be manufactured in a variety of different shapes, sizes and colours, depending on the needs of your business. We supply GRP Water Tanks in special shapes, such as L Shaped tanks, or in a specific colour for specific contents to make tank identification easier for your employees. GRP Water Tanks can also be modified for different connections or fittings in no time at all, as cut outs can be done with common plumbing tools to the sides or bottom without jeopardising the structural integrity of the tank.
GRP Tanks can be produced to store water, or other chemicals at varying concentrations, depending on your business needs. The tanks can be specially manufactured with specific, stronger resins than are normally used on standard tanks in order to accommodate for this. Simply contacting us to discuss your chemical tank requirements can adapt these tanks to your business needs. GRP Water Tanks can also be purchased pre-insulated, protecting the contents from extremes in temperature, which can be perfect in preventing bacteria growth or maintaining the contents and at constant temperature.
For more info contact GRP tank UAE or Call us at +971 4 252 2966
Circumstances can make choosing the right water tank for your application difficult. It may be that access to an area is restricted, or replacing a defective water tank involves altering the building’s structure. In such cases sectional water tanks are often an excellent solution, being used in hotels, schools and hospitals across the world.
While sectional water tanks are often more expensive than one piece water tanks or semi-sectional tanks, solutions which we would always recommend considering first, they can definitely be worth it. There are three main types of sectional water tanks offered by companies, depending on the conditions of your site and access restrictions. These are:
Externally Flanged Base
E.F.B. sectional water tanks are designed to be installed on raised supports such as dwarf walls or steel beams, allowing access to joints and connections underneath the tank such as flanges and fasteners. This type of water tank is typically used to allow positive pressure head to an adjacent pump or related equipment. The benefits of E.F.B water tanks is that they can be fully drained without requiring any pumps; as their connections can be accessed from the outside of the tank they are also easier to maintain. However, these tanks often require you to have no space restrictions due to their size.
Internally Flanged Base
Internally flanged base water tanks are designed for positioning on a fully flat supporting base/foundation or levelled steel beams, with all flanges and fasteners located within the inside of the tank. As the fixtures are only available from the inside, these sectional water tanks cannot be fully drained unless you use a pump. However, because you don’t need to access base panels to use them, I.F.B. tanks allow extra headroom, making them ideally suited for areas where height or headroom is restricted.
Totally Internally Flanged
True to their name, totally internally flanged water tanks are designed with all flanges on the inside of the tank. This allows them to be constructed at maximum capacity, offering a size advantage over the other two types of sectional water tanks, and aids installation in areas where assembly space around the tank is extremely restricted. These versatile sectional water tanks can be manufactured and designed according to your exact site requirements, making them the ideal solution when a bespoke solution is needed.
For more info contact GRP tank suppliers in UAE or call us at +971 4 252 2966